AutoCodes – Nissan – B1060 Nissan

B1060 Nissan Code - Air Bag Sensor Unit

Quick Answer

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1060 Nissan indicates Air Bag Sensor Unit.
Common causes: Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,122

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1060 Nissan Description

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Malfunctioning part can be detected by the on-board self-diagnosis system. It detects a shock that exceeds specified level and monitors such systems as the driver and passenger airbag, side airbag, curtain airbag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly. It contains the G sensors for both frontal and side collisions and spare battery function in case of main battery damage in the collision. The OBDII code sets when the airbag diagnosis sensor unit is out of order or mismatch

OBDII Code B1060 Nissan - Air Bag Sensor Unit - AutoCodes.com — B1060 Nissan Code - Air Bag Sensor Unit

What does this mean?

What are the Possible Causes of the DTC B1060 Nissan?

Faulty Air Bag Sensor Unit (Air Bag Control Module)
Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted
Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection

How to Fix the DTC B1060 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1060 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1060 Nissan code?

Need more information on how to fix the B1060 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1060 Nissan code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1060 Nissan Code

1. What are the common symptoms of OBDII code B1060 in a Nissan related to the Air Bag Sensor Unit?

The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the airbag system's functionality.

2. What could cause OBDII code B1060 to trigger in a Nissan's Air Bag Sensor Unit?

The code B1060 typically triggers due to a malfunction or failure in the Air Bag Sensor Unit, which may be caused by wiring issues, sensor defects, or electronic control module failures.

3. How can I diagnose the OBDII code B1060 related to the Air Bag Sensor Unit in my Nissan?

Diagnosing OBDII code B1060 usually involves using a diagnostic scan tool to retrieve the specific trouble code, inspecting the Air Bag Sensor Unit and its wiring for damage, and testing the sensors and connections for proper functionality.

4. Can I continue driving my Nissan if OBDII code B1060 related to the Air Bag Sensor Unit is present?

It is not recommended to continue driving the vehicle with an active airbag system fault code like B1060, as it may compromise the safety features of the airbag system in the event of a collision.

5. How should I repair OBDII code B1060 in my Nissan's Air Bag Sensor Unit?

Repairing OBDII code B1060 involves addressing the root cause of the issue, which may require replacing the faulty Air Bag Sensor Unit, repairing damaged wiring or connectors, or reprogramming the electronic control module.

6. Are there any safety precautions to consider when working on the Air Bag Sensor Unit in a Nissan to resolve code B1060?

Yes, it is crucial to disconnect the vehicle's battery and wait for the airbag system to fully discharge before working on the Air Bag Sensor Unit to prevent accidental airbag deployment.

7. Can resetting the OBDII code B1060 related to the Air Bag Sensor Unit in my Nissan resolve the issue?

Resetting the code may temporarily clear the warning light, but if the underlying problem with the Air Bag Sensor Unit is not addressed, the code is likely to reappear.

8. Is it possible to perform DIY repairs on the Air Bag Sensor Unit to fix OBDII code B1060 in a Nissan?

While some basic inspections and wiring checks can be done DIY, repairing or replacing the Air Bag Sensor Unit itself is best left to professional mechanics due to safety and technical considerations.

9. How much does it typically cost to repair OBDII code B1060 in a Nissan's Air Bag Sensor Unit?

The cost of repairing OBDII code B1060 can vary depending on the extent of the issue, parts needed for replacement or repair, and labor costs, which can range from a few hundred to over a thousand dollars.

10. What is the importance of addressing OBDII code B1060 related to the Air Bag Sensor Unit in a Nissan promptly?

Promptly addressing OBDII code B1060 is crucial for ensuring the proper functionality of the airbag system, which is a critical safety feature designed to protect occupants in the event of a collision.