AutoCodes – Infiniti – B1060 Infiniti

B1060 Infiniti Code - Air Bag Sensor Unit

Quick Answer

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1060 Infiniti indicates Air Bag Sensor Unit.
Common causes: Common causes include Faulty Air Bag Sensor Unit (Air Bag Control Module), Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted, Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 799

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 11, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1060 Infiniti Description

Detects the whole SRS electrical system and displays the malfunction either by illuminating or blinking the airbag warning lamp in the combination meter. Malfunctioning part can be detected by the on-board self-diagnosis system. It detects a shock that exceeds specified level and monitors such systems as the driver and passenger airbag, side airbag, curtain airbag, pre-tensioner seat belts and Occupant Classification System (OCS) operate properly. It contains the G sensors for both frontal and side collisions and spare battery function in case of main battery damage in the collision. The OBDII code sets when the airbag diagnosis sensor unit is out of order or mismatch

OBDII Code B1060 Infiniti - Air Bag Sensor Unit - AutoCodes.com — B1060 Infiniti Code - Air Bag Sensor Unit

What does this mean?

What are the Possible Causes of the DTC B1060 Infiniti?

Faulty Air Bag Sensor Unit (Air Bag Control Module)
Air Bag Sensor Unit (Air Bag Control Module) harness is open or shorted
Air Bag Sensor Unit (Air Bag Control Module) circuit poor electrical connection

How to Fix the DTC B1060 Infiniti?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1060 Infiniti code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1060 Infiniti code?

Need more information on how to fix the B1060 Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1060 Infiniti code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1060 Infiniti Code

1. What are the common symptoms of OBDII code B1060 in an Infiniti related to the Air Bag Sensor Unit?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system's functionality.

2. What are the possible causes of OBDII code B1060 in an Infiniti?

The code B1060 typically indicates a fault with the Air Bag Sensor Unit, which could be caused by a malfunction in the sensor itself, wiring issues, or a faulty connection.

3. How can I diagnose the OBDII code B1060 related to the Air Bag Sensor Unit in my Infiniti?

Diagnosing this code requires specialized diagnostic equipment to read the fault codes stored in the airbag system's control module. A thorough inspection of the sensor unit and its connections is also necessary.

4. Can I continue driving my Infiniti with OBDII code B1060 related to the Air Bag Sensor Unit?

It is not recommended to drive the vehicle with an active airbag system fault code, as it may compromise the safety of the occupants in the event of a collision.

5. How can I repair OBDII code B1060 in my Infiniti related to the Air Bag Sensor Unit?

Repairing this code may involve replacing the faulty Air Bag Sensor Unit, repairing any damaged wiring or connections, and clearing the fault codes from the system using a diagnostic tool.

6. Are there any safety precautions I should take when working on the Air Bag Sensor Unit in my Infiniti?

When working on the airbag system, it is crucial to disconnect the vehicle's battery and wait for at least 10 minutes before starting any repairs to ensure the system is safely deactivated.

7. Can a DIY enthusiast fix OBDII code B1060 related to the Air Bag Sensor Unit in an Infiniti?

Due to the critical nature of the airbag system and the specialized tools required for diagnosis and repair, it is recommended to have this issue addressed by a qualified technician.

8. How much does it cost to repair OBDII code B1060 in an Infiniti related to the Air Bag Sensor Unit?

The cost of repair can vary depending on the exact cause of the issue, the labor rates of the repair shop, and the cost of any replacement parts needed.

9. Will resetting the OBDII code B1060 related to the Air Bag Sensor Unit make the problem go away?

Simply resetting the fault code without addressing the underlying issue will not solve the problem. It is essential to diagnose and repair the root cause of the code to ensure the airbag system functions properly.

10. How often should I get the airbag system in my Infiniti checked to prevent OBDII code B1060 from occurring?

Regular maintenance and inspections of the airbag system, as recommended by the vehicle manufacturer, can help prevent issues like code B1060 from occurring.