AutoCodes – Jeep – B1058 Jeep

B1058 Jeep Code - Recirculation Door Control

Quick Answer

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. Common causes include Faulty Recirculation Door Actuator, Recirculation Door Actuator harness is open or shorted, Recirculation Door Actuator circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1058 Jeep indicates Recirculation Door Control.
Common causes: Common causes include Faulty Recirculation Door Actuator, Recirculation Door Actuator harness is open or shorted, Recirculation Door Actuator circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 6,909

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1058 Jeep Description

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. The actuators are connected to the A/C Heater Control by a dedicated five-wire sensor and control circuits. The actuator can move the blend/mode-air doors in two directions. When the A/C Heater Control pulls the voltage on one side of the control circuit high and the other low, the door actuator will move in one direction. When the A/C Heater Control reverses the polarity of the voltage to the motor, the door actuator moves in the opposite direction. Once the A/C Heater Control makes the voltage to both control circuits high or low, the door actuator will stop its movement and stay in that position. The blend/mode door actuator contains a three wire potentiometer, which the A/C Heater Control uses to monitor the relative position of the blend/mode air doors. The A/C Heater Control learns the blend-air door stop positions during the calibration procedure.

OBDII Code B1058 Jeep - Recirculation Door Control - AutoCodes.com — B1058 Jeep Code - Recirculation Door Control

What does this mean?

What are the Possible Causes of the DTC B1058 Jeep?

Faulty Recirculation Door Actuator
Recirculation Door Actuator harness is open or shorted
Recirculation Door Actuator circuit poor electrical connection
Faulty A/C Heater Module

How to Fix the DTC B1058 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1058-11-RECIRCULATION DOOR CONTROL CIRCUIT SHORT TO GROUND
B1058-12-RECIRCULATION DOOR CONTROL CIRCUIT SHORT TO BATTERY
B1058-13-RECIRCULATION DOOR CONTROL CIRCUIT OPEN
B1058-92-RECIRCULATION DOOR CONTROL PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1058 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1058 Jeep code?

Need more information on how to fix the B1058 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1058 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1058 Jeep Code

1. What are the common symptoms of OBDII code B1058 in a Jeep related to the Recirculation Door Control?

The common symptoms include inconsistent air conditioning performance, unusual noises coming from the HVAC system, and the inability to control the airflow direction.

2. What typically causes the OBDII code B1058 related to the Recirculation Door Control in a Jeep?

The code B1058 is often triggered by a malfunction in the recirculation door actuator or a problem with the recirculation door itself, such as being stuck or broken.

3. How can I diagnose the issue causing OBDII code B1058 in my Jeep?

Diagnosing the issue involves checking the recirculation door actuator for proper function, inspecting the recirculation door for any obstructions or damage, and using a diagnostic scanner to retrieve specific error codes.

4. Can I still drive my Jeep with OBDII code B1058 related to the Recirculation Door Control?

While it may be possible to drive the vehicle with this code, it is not recommended as it can lead to discomfort due to HVAC system issues and may cause further damage if left unresolved.

5. What are some repair tips for addressing OBDII code B1058 in a Jeep?

Repair tips include replacing a faulty recirculation door actuator, repairing or replacing the recirculation door, ensuring proper calibration of the HVAC system, and clearing the error code with a diagnostic tool.

6. Is it possible to reset the OBDII code B1058 in a Jeep without fixing the underlying issue?

Resetting the code without addressing the root cause may temporarily clear the error, but it is likely to reappear until the underlying problem with the Recirculation Door Control is fixed.

7. How much does it typically cost to repair OBDII code B1058 in a Jeep related to the Recirculation Door Control?

The cost of repair can vary depending on the specific issue, but it may range from $100 to $400, including parts and labor.

8. Can a DIY enthusiast repair OBDII code B1058 in a Jeep related to the Recirculation Door Control?

Depending on the skill level and experience of the individual, some DIY enthusiasts may be able to address this issue by following repair guides and using basic tools. However, professional expertise is recommended for complex repairs.

9. What other OBDII codes may be related to issues with the Recirculation Door Control in a Jeep?

Other related OBDII codes may include B1059, B1060, and B1061, which can indicate different malfunctions within the HVAC system related to the Recirculation Door Control.

10. How important is it to address OBDII code B1058 in a Jeep related to the Recirculation Door Control promptly?

It is essential to address this code promptly to ensure proper functioning of the HVAC system, maintain interior comfort, prevent further damage, and avoid potential safety hazards while driving.