AutoCodes – Dodge – B1058 Dodge

B1058 Dodge Code - Recirculation Door Control

Quick Answer

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. Common causes include Faulty Recirculation Door Actuator, Recirculation Door Actuator harness is open or shorted, Recirculation Door Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1058 Dodge indicates Recirculation Door Control.
Common causes: Common causes include Faulty Recirculation Door Actuator, Recirculation Door Actuator harness is open or shorted, Recirculation Door Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 14,648

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1058 Dodge Description

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. The actuators are connected to the A/C Heater Control by a dedicated five-wire sensor and control circuits. The actuator can move the blend/mode-air doors in two directions. When the A/C Heater Control pulls the voltage on one side of the control circuit high and the other low, the door actuator will move in one direction. When the A/C Heater Control reverses the polarity of the voltage to the motor, the door actuator moves in the opposite direction. Once the A/C Heater Control makes the voltage to both control circuits high or low, the door actuator will stop its movement and stay in that position. The blend/mode door actuator contains a three wire potentiometer, which the A/C Heater Control uses to monitor the relative position of the blend/mode air doors. The A/C Heater Control learns the blend-air door stop positions during the calibration procedure.

OBDII Code B1058 Dodge - Recirculation Door Control - AutoCodes.com — B1058 Dodge Code - Recirculation Door Control

What does this mean?

What are the Possible Causes of the DTC B1058 Dodge?

Faulty Recirculation Door Actuator
Recirculation Door Actuator harness is open or shorted
Recirculation Door Actuator circuit poor electrical connection
Faulty A/C Heater Module

How to Fix the DTC B1058 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1058-11-RECIRCULATION DOOR CONTROL CIRCUIT SHORT TO GROUND
B1058-12-RECIRCULATION DOOR CONTROL CIRCUIT SHORT TO BATTERY
B1058-13-RECIRCULATION DOOR CONTROL CIRCUIT OPEN
B1058-92-RECIRCULATION DOOR CONTROL PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1058 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1058 Dodge code?

Need more information on how to fix the B1058 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1058 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1058 Dodge Code

1. What are common symptoms of OBDII code B1058 Dodge related to Recirculation Door Control?

Symptoms may include inconsistent air conditioning or heating, unusual noises coming from the HVAC system, or the inability to control airflow direction.

2. What are possible causes of OBDII code B1058 in a Dodge vehicle?

Potential causes of the Recirculation Door Control code B1058 include a faulty recirculation door actuator, damaged wiring, or a malfunctioning HVAC control module.

3. How can I diagnose the issue causing OBDII code B1058 in my Dodge?

Diagnosis typically involves inspecting the recirculation door actuator for proper operation, checking the wiring for any damage or loose connections, and using a scan tool to communicate with the HVAC control module.

4. Can I repair OBDII code B1058 in my Dodge at home?

Repairing code B1058 may be possible at home for those with mechanical knowledge. It often involves replacing the faulty recirculation door actuator or repairing any damaged wiring. However, if unsure, it's best to consult a professional mechanic.

5. Are there any tips for preventing OBDII code B1058 from occurring again in my Dodge?

To prevent recurrence of the Recirculation Door Control code, it's recommended to address any HVAC system issues promptly, ensure proper maintenance of the climate control components, and avoid forcing the controls if they become stiff.

6. How critical is it to address OBDII code B1058 in a Dodge promptly?

While the vehicle may still be operable with code B1058 related to Recirculation Door Control, it's advisable to address the issue promptly to avoid potential discomfort due to HVAC system malfunctions and prevent further damage to related components.

7. Can OBDII code B1058 in a Dodge be reset without fixing the underlying issue?

Resetting the code without addressing the root cause, such as a faulty recirculation door actuator, is not recommended. The issue will likely persist, and the code will reappear once the problem is detected again by the vehicle's diagnostics.

8. How much does it typically cost to repair OBDII code B1058 related to Recirculation Door Control in a Dodge?

The cost of repairing code B1058 can vary depending on the specific issue causing it, the labor rates of the repair shop, and the cost of any necessary parts. It's best to obtain quotes from different mechanics for an accurate estimate.

9. Is it safe to continue driving my Dodge with OBDII code B1058 present?

While driving with code B1058 may not present immediate safety concerns, it's recommended to address the issue at the earliest convenience to ensure optimal functionality of the HVAC system and prevent any potential long-term problems.

10. Can extreme temperatures or weather conditions trigger OBDII code B1058 in a Dodge?

Extreme temperatures or weather conditions could potentially exacerbate existing issues related to the Recirculation Door Control system in a Dodge, leading to the triggering of code B1058. Regular maintenance and prompt repairs can help mitigate such risks.