AutoCodes – Chrysler – B1058 Chrysler

B1058 Chrysler Code - Recirculation Door Control

Quick Answer

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. Common causes include Faulty Recirculation Door Actuator, Recirculation Door Actuator harness is open or shorted, Recirculation Door Actuator circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1058 Chrysler indicates Recirculation Door Control.
Common causes: Common causes include Faulty Recirculation Door Actuator, Recirculation Door Actuator harness is open or shorted, Recirculation Door Actuator circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 7,876

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1058 Chrysler Description

After the initial installation of the A/C Heater Control, the controller is calibrated to each individual blend/mode door actuator. The actuators are connected to the A/C Heater Control by a dedicated five-wire sensor and control circuits. The actuator can move the blend/mode-air doors in two directions. When the A/C Heater Control pulls the voltage on one side of the control circuit high and the other low, the door actuator will move in one direction. When the A/C Heater Control reverses the polarity of the voltage to the motor, the door actuator moves in the opposite direction. Once the A/C Heater Control makes the voltage to both control circuits high or low, the door actuator will stop its movement and stay in that position. The blend/mode door actuator contains a three wire potentiometer, which the A/C Heater Control uses to monitor the relative position of the blend/mode air doors. The A/C Heater Control learns the blend-air door stop positions during the calibration procedure.

OBDII Code B1058 Chrysler - Recirculation Door Control - AutoCodes.com — B1058 Chrysler Code - Recirculation Door Control

What does this mean?

What are the Possible Causes of the DTC B1058 Chrysler?

Faulty Recirculation Door Actuator
Recirculation Door Actuator harness is open or shorted
Recirculation Door Actuator circuit poor electrical connection
Faulty A/C Heater Module

How to Fix the DTC B1058 Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1058-11-RECIRCULATION DOOR CONTROL CIRCUIT SHORT TO GROUND
B1058-12-RECIRCULATION DOOR CONTROL CIRCUIT SHORT TO BATTERY
B1058-13-RECIRCULATION DOOR CONTROL CIRCUIT OPEN
B1058-92-RECIRCULATION DOOR CONTROL PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1058 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1058 Chrysler code?

Need more information on how to fix the B1058 Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1058 Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1058 Chrysler Code

1. What are the common symptoms of OBDII code B1058 Chrysler related to Recirculation Door Control?

- Common symptoms include inconsistent air conditioning performance, unusual noises coming from the HVAC system, and the inability to control air flow direction.

2. What are the possible causes of OBDII code B1058 Chrysler for Recirculation Door Control?

- The code may be triggered by a malfunctioning recirculation door actuator, a faulty recirculation door, damaged wiring, or a problem with the HVAC control module.

3. How can I diagnose OBDII code B1058 Chrysler related to Recirculation Door Control?

- Diagnosis involves using a scan tool to retrieve the specific code, inspecting the recirculation door actuator and door for proper operation, and checking the wiring for any signs of damage.

4. Can I continue to drive my vehicle with OBDII code B1058 Chrysler triggered for Recirculation Door Control?

- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to avoid potential discomfort due to HVAC system malfunctions.

5. How can I repair OBDII code B1058 Chrysler for Recirculation Door Control?

- Repair options may include replacing the recirculation door actuator, repairing or replacing the recirculation door, fixing any damaged wiring, or reprogramming the HVAC control module.

6. Are there any DIY tips for fixing OBDII code B1058 Chrysler related to Recirculation Door Control?

- DIY enthusiasts can attempt to access and inspect the recirculation door actuator and door themselves, but it is recommended to consult a professional for accurate diagnosis and repair.

7. Will resetting the OBDII system clear code B1058 Chrysler for Recirculation Door Control?

- Resetting the OBDII system may temporarily clear the code, but it is essential to address the root cause of the issue to prevent the code from reappearing.

8. What is the typical cost to repair OBDII code B1058 Chrysler associated with Recirculation Door Control?

- The cost of repair can vary depending on the specific cause of the issue, but it may range from $100 to $500, including parts and labor.

9. How long does it usually take to repair OBDII code B1058 Chrysler for Recirculation Door Control?

- The repair time can vary based on the extent of the issue and the expertise of the technician, but it typically takes 1-3 hours to diagnose and fix the problem.

10. Can extreme weather conditions affect OBDII code B1058 Chrysler related to Recirculation Door Control?

- Extreme temperature changes can potentially exacerbate issues with the recirculation door control system, leading to the triggering of the B1058 code. Regular maintenance can help prevent such problems.