AutoCodes – Nissan – B1050 2008 Nissan Altima Sedan

B1050 2008 Nissan Altima Sedan Code - Driver Air Bag Module Short

Quick Answer

The driver air bag module is dual stage and wired to the air bag diagnosis sensor unit through the spiral cable. Common causes include Faulty Driver Air Bag, Faulty Spiral Cable, Driver Air Bag harness is shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1050 2008 Nissan Altima Sedan indicates Driver Air Bag Module Short.
Common causes: Common causes include Faulty Driver Air Bag, Faulty Spiral Cable, Driver Air Bag harness is shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,548

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 11, 2021

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1050 2008 Nissan Altima Sedan Description

The driver air bag module is dual stage and wired to the air bag diagnosis sensor unit through the spiral cable. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the driver air bag module including the spiral cable. In case of frontal collision whose acceleration exceeds the specified level, the ignition materials are ignited by the electric ignition system. The system burns and introduces the chemical reaction of gas generating materials to generate hot gases that flow into the air bag through a filter and expand the bag.

OBDII Code B1050 2008 Nissan Altima Sedan - Driver Air Bag Module Short - AutoCodes.com — B1050 2008 Nissan Altima Sedan Code - Driver Air Bag Module Short

What does this mean?

What are the Possible Causes of the DTC B1050 2008 Nissan Altima Sedan?

Faulty Driver Air Bag
Faulty Spiral Cable
Driver Air Bag harness is shorted
Driver Air Bag circuit poor electrical connection

How to Fix the DTC B1050 2008 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Factory Service Manual Repair Order:

1. Visually check the wiring harness connection.
2. Replace the harness if it has visible damage.
3. Replace the driver air bag module.
4. Replace the spiral cable.
5. Replace the air bag diagnosis sensor unit.
6. Replace the related harness.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1050 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1050 2008 Nissan Altima Sedan code?

Need more information on how to fix the B1050 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1050 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1050 2008 Nissan Altima Sedan Code

1. What are the common symptoms of OBDII code B1050 in a 2008 Nissan Altima Sedan?

- The common symptoms of OBDII code B1050 (Driver Air Bag Module Short) in a 2008 Nissan Altima Sedan may include the airbag warning light illuminating on the dashboard.

2. What does OBDII code B1050 mean for a 2008 Nissan Altima Sedan?

- OBDII code B1050 indicates a short in the driver airbag module circuit of a 2008 Nissan Altima Sedan.

3. What are the possible causes of OBDII code B1050 in a 2008 Nissan Altima Sedan?

- Possible causes of OBDII code B1050 in a 2008 Nissan Altima Sedan include a faulty driver airbag module, damaged wiring, or a loose connection.

4. How serious is OBDII code B1050 in a 2008 Nissan Altima Sedan?

- OBDII code B1050 (Driver Air Bag Module Short) is a serious issue as it pertains to the safety of the driver. It indicates a problem with the driver airbag system that may affect its proper functioning in the event of a collision.

5. Can OBDII code B1050 be repaired by the vehicle owner?

- Repairing OBDII code B1050 (Driver Air Bag Module Short) in a 2008 Nissan Altima Sedan typically requires professional diagnostic equipment and expertise. It is recommended to have the issue diagnosed and repaired by a qualified technician.

6. How much does it cost to repair OBDII code B1050 in a 2008 Nissan Altima Sedan?

- The cost of repairing OBDII code B1050 in a 2008 Nissan Altima Sedan can vary depending on the exact cause of the issue and the labor rates of the repair shop. It is advisable to obtain a diagnosis and repair estimate from a trusted automotive service provider.

7. Is it safe to drive a 2008 Nissan Altima Sedan with OBDII code B1050 present?

- It is not recommended to drive a 2008 Nissan Altima Sedan with OBDII code B1050 (Driver Air Bag Module Short) present, as it indicates a potential problem with the driver airbag system that may compromise safety in the event of a collision.

8. How can I prevent OBDII code B1050 from occurring in my 2008 Nissan Altima Sedan?

- To prevent OBDII code B1050 from occurring in a 2008 Nissan Altima Sedan, it is important to regularly inspect the airbag system components, ensure proper maintenance of the vehicle, and address any warning lights or issues promptly.

9. Can a DIY enthusiast troubleshoot OBDII code B1050 in a 2008 Nissan Altima Sedan?

- Troubleshooting and repairing OBDII code B1050 (Driver Air Bag Module Short) in a 2008 Nissan Altima Sedan may require specialized tools and expertise. It is recommended to seek assistance from a professional technician to diagnose and resolve the issue.

10. How long does it typically take to repair OBDII code B1050 in a 2008 Nissan Altima Sedan?

- The repair time for OBDII code B1050 (Driver Air Bag Module Short) in a 2008 Nissan Altima Sedan can vary based on the exact cause of the issue and the availability of parts. It is advisable to consult with a qualified technician for an accurate estimate of repair time.