B1032 Code - SDARS Satellite Antenna Short
Quick Answer
Digital signals are received by the satellite radio antenna and sent to the Satellite Digital Audio Receiver System (SDARS) module, which then converts the signals and provides audio signals to the ACM. Common causes include Faulty Satellite Antenna, Satellite Antenna harness is open or shorted, Satellite Antenna circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B1032 indicates SDARS Satellite Antenna Short.
- Common causes
- Common causes include Faulty Satellite Antenna, Satellite Antenna harness is open or shorted, Satellite Antenna circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B1032 Description
Late Build Vehicles Without Navigation And All Vehicles With Navigation: Digital signals are received by the satellite radio antenna and sent directly to the ACM, as the satellite radio receiver is built into the ACM.
A short to ground in the satellite radio antenna typically has no effect on the antenna signal. However, an open in the antenna circuit results in no sound from the satellite radio system. A short to voltage in the antenna circuit can have varying effects on the system. The OBDII code sets when a short to ground or short to voltage is detected in the satellite antenna circuit. This DTC can be either continuous or on-demand and applies to early build vehicles without navigation.
What are the Possible Causes of the DTC B1032?
- Faulty Satellite Antenna
- Satellite Antenna harness is open or shorted
- Satellite Antenna circuit poor electrical connection
- Faulty Satellite Digital Audio Receiver System (SDARS) module (early build vehicles without navigation)
- Faulty Audio Control Module (ACM) (late build vehicles without navigation and all vehicles with navigation)
How to Fix the DTC B1032?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1032 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1032 code?
Need more information on how to fix the B1032 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1032 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B1032 Ford — SDARS Satellite Antenna Short
- B1032 Lincoln — SDARS Satellite Antenna Short
- B1032 Mercury — SDARS Satellite Antenna Short
Frequently Asked Questions about B1032 Code
1. What are the common symptoms of OBDII code B1032 (SDARS Satellite Antenna Short)?
- The common symptoms of B1032 include loss of satellite radio signal, poor reception quality, and possibly an error message on the radio display.
2. What are the possible causes of OBDII code B1032?
- The B1032 code is typically triggered by a short circuit in the satellite antenna wiring, a damaged antenna, water intrusion, or a faulty antenna module.
3. How can I diagnose the issue causing OBDII code B1032?
- To diagnose the B1032 code, you can visually inspect the antenna and wiring for any visible damage, test the antenna for continuity, and use a scan tool to check for related fault codes.
4. Can I repair the SDARS Satellite Antenna Short issue myself?
- Depending on your level of expertise, you may be able to repair the B1032 code yourself by replacing the damaged antenna, repairing the wiring, or addressing any water intrusion issues.
5. Is it safe to continue driving with OBDII code B1032 present?
- It is generally safe to continue driving with the B1032 code, but it is recommended to address the issue promptly to restore satellite radio functionality and prevent any potential long-term damage.
6. How much does it typically cost to repair OBDII code B1032?
- The cost of repairing B1032 can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor at a professional repair shop.
7. Can resetting the OBDII system clear the B1032 code?
- Resetting the OBDII system may temporarily clear the B1032 code, but if the underlying issue causing the code is not addressed, it is likely to reappear.
8. Will replacing the SDARS antenna fix the B1032 code?
- Replacing the SDARS antenna is a common repair for the B1032 code and often resolves the issue, especially if the antenna is damaged or faulty.
9. How long does it take to repair the SDARS Satellite Antenna Short issue?
- The repair time for B1032 can vary depending on the exact cause of the problem and the complexity of the repair, but it typically takes 1-2 hours for a professional technician to diagnose and fix the issue.
10. Can extreme weather conditions cause OBDII code B1032 to trigger?
- Yes, extreme weather conditions such as heavy rain or snow can potentially cause water intrusion into the antenna system, leading to a short circuit and triggering the B1032 code.
Discuss the causes and fixes for B1032 OBDII Code
Code B1032 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
