AutoCodes – Ford – B1007 Ford

B1007 Ford Code - High-Beam Headlamp Switch Component Failure

Quick Answer

The Steering Column Control Module (SCCM) monitors input from the multifunction and headlamp switches. Common causes include Faulty High-Beam Headlamp Switch, High-Beam Headlamp Switch harness is open or shorted, High-Beam Headlamp Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1007 Ford indicates High-Beam Headlamp Switch Component Failure.
Common causes: Common causes include Faulty High-Beam Headlamp Switch, High-Beam Headlamp Switch harness is open or shorted, High-Beam Headlamp Switch circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,227

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1007 Ford Description

The Steering Column Control Module (SCCM) monitors input from the multifunction and headlamp switches. When the headlamp switch is in the HEADLAMPS ON position and the multifunction switch is placed in the HIGH BEAM position, the SCCM sends a message to the Body Control Module (BCM) over the High Speed Controller Area Network (HS-CAN), indicating a high beam request. The BCM then provides voltage to the high beams. The BCM provides an overload protection of the high beam output circuits. When an excessive current draw is detected, the BCM disables the affected high beam circuit driver. The Instrument Panel Cluster (IPC) also receives a message over the HS-CAN to illuminate the high beam indicator when a request for the high beams is received. This DTC sets when the SCCM detects a fault from the multifunction switch input.

OBDII Code B1007 Ford - High-Beam Headlamp Switch Component Failure - AutoCodes.com — B1007 Ford Code - High-Beam Headlamp Switch Component Failure

What does this mean?

What are the Possible Causes of the DTC B1007 Ford?

Faulty High-Beam Headlamp Switch
High-Beam Headlamp Switch harness is open or shorted
High-Beam Headlamp Switch circuit poor electrical connection
Faulty Steering Column Control Module (SCCM)

How to Fix the DTC B1007 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1007 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1007 Ford code?

Need more information on how to fix the B1007 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1007 Ford code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1007 Ford Code

1. What are the common symptoms of OBDII code B1007 Ford (High-Beam Headlamp Switch Component Failure)?

- Dim or flickering high-beam headlights, high beams not working at all, or high beams stuck in the on position.

2. What causes the OBDII code B1007 Ford to trigger?

- The code is typically triggered by a malfunction in the high-beam headlamp switch component, such as a faulty switch or wiring issue.

3. How can I diagnose the OBDII code B1007 Ford?

- Diagnose the code by inspecting the high-beam headlamp switch, checking for loose or damaged wiring connections, and testing the switch for continuity or proper operation.

4. Can I still drive my vehicle with the B1007 Ford code?

- It is generally safe to drive with this code, but it is recommended to address the issue promptly to ensure proper high-beam functionality.

5. How do I repair the OBDII code B1007 Ford?

- Repair options may include replacing the high-beam headlamp switch, repairing or replacing damaged wiring, or addressing any underlying electrical issues causing the fault.

6. Are there any DIY tips for fixing the OBDII code B1007 Ford?

- DIY tips include checking fuses related to the high-beam circuit, inspecting the switch for physical damage, and consulting the vehicle's service manual for specific repair instructions.

7. Will resetting the OBDII code B1007 Ford make it go away permanently?

- Resetting the code may temporarily clear the fault, but if the underlying issue is not addressed, the code is likely to return.

8. Can a faulty high-beam headlamp switch cause other electrical problems in the vehicle?

- Yes, a faulty switch can potentially cause other electrical issues, such as affecting the operation of other lighting systems or components.

9. Is it necessary to visit a mechanic for the repair of the B1007 Ford code?

- While some DIY enthusiasts may be able to address the issue themselves, it is recommended to consult a qualified mechanic for a thorough diagnosis and proper repair.

10. How much does it typically cost to repair the OBDII code B1007 Ford at a dealership or repair shop?

- The cost of repair can vary depending on the extent of the issue, but expect to pay for parts and labor, which may range from $100 to $300 or more, depending on the specific repairs needed.