AutoCodes – Chevrolet – B1000 2016 Chevrolet Silverado

B1000 2016 Chevrolet Silverado Code - Electronic Control Unit

Quick Answer

The internal fault detection is handled inside the Electronic Control Unit (ECU). Common causes include Faulty Electronic Control Unit (ECU), Electronic Control Unit harness is open or shorted, Electronic Control Unit circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1000 2016 Chevrolet Silverado indicates Electronic Control Unit.
Common causes: Common causes include Faulty Electronic Control Unit (ECU), Electronic Control Unit harness is open or shorted, Electronic Control Unit circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 256

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 04, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1000 2016 Chevrolet Silverado Description

The internal fault detection is handled inside the Electronic Control Unit (ECU). The symptom byte information is for engineering reference only. No external circuit diagnosis is involved. The Diagnostic Trouble Code (DTC) will be set when the device has detected an internal malfunction. If DTC B1000 is set, replace the device that sets the DTC.

OBDII Code B1000 2016 Chevrolet Silverado - Electronic Control Unit - AutoCodes.com — B1000 2016 Chevrolet Silverado Code - Electronic Control Unit

What does this mean?

What are the Possible Causes of the DTC B1000 2016 Chevrolet Silverado?

Faulty Electronic Control Unit (ECU)
Electronic Control Unit harness is open or shorted
Electronic Control Unit circuit poor electrical connection

How to Fix the DTC B1000 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1000:00 Electronic Control Unit (ECU) Performance No Additional Information Available
B1000:04 Side Object Detection Performance - RAM Failure
B1000:08 Electronic Control Unit Performance Signal Invalid
B1000:12 Electronic Control Unit Performance Below Minimum Threshold
B1000:31 Electronic Control Unit General Checksum Problem
B1000:33 Electronic Control Unit Performance Special Memory Failure
B1000:34 Electronic Control Unit Performance RAM Integrity
B1000:35 Electronic Control Unit Performance ROM Integrity
B1000:36 Electronic Control Unit Performance EEPROM Integrity
B1000:37 Electronic Control Unit Performance Watchdog / Safety Failure
B1000:38 Electronic Control Unit Performance Supervision Software Failure
B1000:39 Electronic Control Unit Performance Internal Electronic Failure
B1000:43 Electronic Control Unit Performance EEPROM Error
B1000:46 Side Object Detection Performance - Invalid Configuration
B1000:56 Electronic Control Unit Performance Allowable Number of Transitions/Events Exceeded
B1000:57 Electronic Control Unit Performance
B1000:73 Electronic Control Unit Performance Parity Error
B1000:0F Electronic Control Unit Performance Erratic
B1000:2B Electronic Control Unit Performance Missing Reference
B1000:2C Electronic Control Unit Performance Reserved
B1000:3B Electronic Control Unit Performance Internal Self-Test Failed
B1000:3C Electronic Control Unit Performance Internal Communications Failure
B1000:4A Side Object Detection Performance - PROM Checksum Error
B1000:F0 Side Object Detection RF Transmit Chain Failed
B1000:F1 Side Object Detection RF Receive Chain Failed
B1000:F2 Side Object Detection Frequency Calibration Failure
B1000:F3 Side Object Detection Inter-Processor Communication Failed

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1000 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1000 2016 Chevrolet Silverado code?

Need more information on how to fix the B1000 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1000 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1000 2016 Chevrolet Silverado Code

1. What does the OBDII code B1000 mean for a 2016 Chevrolet Silverado?

- The B1000 code on a 2016 Chevrolet Silverado indicates a fault in the Electronic Control Unit (ECU).

2. What are common symptoms of the B1000 code in a 2016 Chevrolet Silverado?

- Common symptoms may include issues with starting the vehicle, dashboard warning lights, or problems with various electronic systems.

3. What are possible causes of the B1000 code in a 2016 Chevrolet Silverado?

- Causes of the B1000 code can include a malfunctioning ECU, wiring issues, a faulty sensor, or a software glitch.

4. How can I diagnose the B1000 code in my 2016 Chevrolet Silverado?

- Diagnosing the B1000 code typically involves using an OBDII scanner to retrieve the code and then performing further testing to pinpoint the exact cause.

5. Can I still drive my 2016 Chevrolet Silverado with the B1000 code present?

- It is not recommended to drive your vehicle with the B1000 code present, as it may lead to further damage or safety issues.

6. How do I repair the B1000 code in a 2016 Chevrolet Silverado?

- Repairing the B1000 code often involves fixing the underlying issue causing the fault, which may include repairing wiring, replacing components, or reprogramming the ECU.

7. Is it necessary to reset the OBDII system after fixing the B1000 code in a 2016 Chevrolet Silverado?

- Yes, it is important to reset the OBDII system after repairing the B1000 code to clear the fault code and ensure proper functioning of the vehicle.

8. Can a DIY enthusiast fix the B1000 code in a 2016 Chevrolet Silverado?

- While some basic troubleshooting can be done by a DIY enthusiast, diagnosing and repairing the B1000 code may require advanced tools and expertise.

9. How much does it cost to repair the B1000 code in a 2016 Chevrolet Silverado?

- The cost of repairing the B1000 code can vary depending on the underlying issue, parts needed, and labor costs at a repair shop.

10. What steps can I take to prevent the B1000 code from appearing in my 2016 Chevrolet Silverado?

- Regular maintenance, timely repairs of electronic components, and avoiding rough driving conditions can help prevent the recurrence of the B1000 code in your vehicle.