B0987 2018 GMC Sierra Code - Vehicle Direction Camera Indicator Circuit
Quick Answer
The lane departure warning system is enabled and disabled through the lane departure switch. Common causes include Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted, Frontview Camera Module circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0987 2018 GMC Sierra indicates Vehicle Direction Camera Indicator Circuit.
- Common causes
- Common causes include Faulty Frontview Camera Module, Frontview Camera Module harness is open or shorted, Frontview Camera Module circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0987 2018 GMC Sierra Description
When the system is operating and can detect the lane markings, the front view camera module will request via serial data communications that the instrument cluster illuminates the green lane departure ready-to-assist indicator. If the front view camera module detects that the vehicle unintentionally crosses a lane marking without the turn signal being used, the module will request the vehicle direction display to flash the amber lane departure warning indicator. Anr audible warning will also alert three times when the amber lane departure warning indicator in the vehicle direction display is flashing.
What are the Possible Causes of the DTC B0987 2018 GMC Sierra?
- Faulty Frontview Camera Module
- Frontview Camera Module harness is open or shorted
- Frontview Camera Module circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B0987 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0987:06 Vehicle Direction Camera Indicator Circuit Low Voltage/Open
B0987:0B Vehicle Direction Camera Indicator Circuit High Current
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0987 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0987 2018 GMC Sierra code?
Need more information on how to fix the B0987 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0987 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0987 2018 GMC Sierra Code
1. What does the OBDII code B0987 mean on a 2018 GMC Sierra?
The B0987 code refers to a fault in the Vehicle Direction Camera Indicator Circuit, typically related to the rearview or surround-view camera system.
2. What are the common symptoms of the B0987 code?
Symptoms include inoperative or malfunctioning rearview or surround-view camera, distorted or no video display, and possible warning messages on the dashboard.
3. What causes the B0987 code on a 2018 GMC Sierra?
It can be caused by a faulty camera, damaged wiring or connectors in the camera circuit, or a malfunctioning control module.
4. How can I diagnose the B0987 code?
Check for visible damage to the camera, wiring, and connectors. Use a scan tool to monitor the camera circuit and verify if the control module is receiving proper signals.
5. Can a software issue cause the B0987 code?
Yes, outdated or corrupted software in the vehicle's control module may cause communication errors in the camera system, triggering this code.
6. How do I fix the B0987 code on my GMC Sierra?
Repairs may include replacing the faulty camera, repairing or replacing damaged wiring/connectors, or reprogramming the control module if a software issue is present.
7. Is it safe to drive with the B0987 code active?
Yes, but the rearview or surround-view camera may not function properly, which could reduce visibility and increase the risk of accidents when reversing.
8. How much does it cost to repair the B0987 code on a 2018 GMC Sierra?
Repair costs vary but may range from $100 to $500 depending on whether the issue is a simple wiring repair or a replacement of the camera or control module.
9. Can I clear the B0987 code without repairs?
Clearing the code without addressing the root cause will only temporarily reset it, and the issue will likely return.
10. Should I consult a professional for the B0987 code?
Yes, if you're unsure about diagnosing or repairing the issue yourself, consult a qualified technician to avoid further complications.
Discuss the causes and fixes for B0987 2018 GMC Sierra OBDII Code
Code B0987 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
