AutoCodes – GMC – B0967 2014 GMC Sierra

B0967 2014 GMC Sierra Code - Parking Assist On/Off Switch Circuit

Quick Answer

The parking assist system can be activated and deactivated by pressing the parking assist switch. Common causes include Faulty Parking Assist On/Off Switch, Parking Assist On/Off Switch harness is open or shorted, Parking Assist On/Off Switch circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B0967 2014 GMC Sierra indicates Parking Assist On/Off Switch Circuit.
Common causes: Common causes include Faulty Parking Assist On/Off Switch, Parking Assist On/Off Switch harness is open or shorted, Parking Assist On/Off Switch circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 492

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 03, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0967 2014 GMC Sierra Description

The parking assist system can be activated and deactivated by pressing the parking assist switch. The Parking Assist Control Module applies voltage and monitors the parking assist switch signal circuit. The parking assist switch is a normally open switch. With the switch open, the voltage seen at the front and rear Parking Assist Control Module is high. When the parking assist switch is pressed, the switch is closed, and the signal circuit is pulled to the ground. With the switch closed, the voltage seen at the front and rear Parking Assist Control Module is low. The Parking Assist Control Module will respond to this by activating or deactivating the parking assist function. The Diagnostic Trouble Code (DTC) will be set when the Parking Assist On/Off Switch circuit is not to factory specifications.

OBDII Code B0967 2014 GMC Sierra - Parking Assist On/Off Switch Circuit - AutoCodes.com — B0967 2014 GMC Sierra Code - Parking Assist On/Off Switch Circuit

What does this mean?

What are the Possible Causes of the DTC B0967 2014 GMC Sierra?

Faulty Parking Assist On/Off Switch
Parking Assist On/Off Switch harness is open or shorted
Parking Assist On/Off Switch circuit poor electrical connection
Faulty Parking Assist Control Module

How to Fix the DTC B0967 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0967:02 Parking Assist On/Off Switch Circuit Short to Ground

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0967 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0967 2014 GMC Sierra code?

Need more information on how to fix the B0967 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0967 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0967 2014 GMC Sierra Code

What does the OBDII code B0967 indicate for a 2014 GMC Sierra?

B0967 indicates a problem with the Parking Assist On/Off switch circuit, which may affect the functionality of the parking assist feature in the vehicle.

What are common symptoms of OBDII code B0967?

Common symptoms include a malfunctioning parking assist system, warning lights on the dashboard, and possibly a non-functional Parking Assist On/Off switch.

What could cause the B0967 code to trigger?

Causes can include a faulty Parking Assist On/Off switch, a wiring issue, poor connections, or a malfunctioning parking assist control module.

How can I diagnose the B0967 code?

To diagnose B0967, inspect the Parking Assist On/Off switch for damage, check wiring and connectors for faults, and use a scan tool to monitor the circuit's voltage and continuity.

Is it safe to drive if my GMC Sierra has the B0967 code?

While it may be safe to drive, the parking assist feature will not function properly. It's advisable to address the issue to ensure full functionality of safety features.

What are some repair tips for fixing the B0967 code?

Repair tips include checking and repairing any damaged wiring, replacing a faulty Parking Assist On/Off switch, and ensuring all connections are clean and secure.

Can I clear the B0967 code without fixing the issue?

Yes, you can clear the code using an OBDII scanner, but the underlying issue will likely cause the code to reappear until it is properly repaired.

How much does it typically cost to repair the B0967 code?

Repair costs can vary widely based on the underlying cause but may range from $50 to $300, depending on whether you need to replace the switch, repair wiring, or address other issues.

Will replacing the Parking Assist On/Off switch always fix the B0967 code?

Not necessarily. While replacing the switch can resolve the issue, itâ€™s important to diagnose the entire circuit to ensure there are no other underlying problems affecting the parking assist system.