B0961 2017 GMC Sierra Code - Parking Assist Rear Sensor Right Corner Circuit
Quick Answer
The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. Common causes include Faulty Parking Assist Rear Sensor Right Corner, Parking Assist Rear Sensor Right Corner harness is open or shorted, Parking Assist Rear Sensor Right Corner circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0961 2017 GMC Sierra indicates Parking Assist Rear Sensor Right Corner Circuit.
- Common causes
- Common causes include Faulty Parking Assist Rear Sensor Right Corner, Parking Assist Rear Sensor Right Corner harness is open or shorted, Parking Assist Rear Sensor Right Corner circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0961 2017 GMC Sierra Description
What are the Possible Causes of the DTC B0961 2017 GMC Sierra?
- Faulty Parking Assist Rear Sensor Right Corner
- Parking Assist Rear Sensor Right Corner harness is open or shorted
- Parking Assist Rear Sensor Right Corner circuit poor electrical connection
- Faulty Parking Assist Control Module
How to Fix the DTC B0961 2017 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0961:02 Parking Assist Rear Sensor Right Corner Circuit Short to Ground
B0961:04 Parking Assist Rear Sensor Right Corner Circuit Open
B0961:06 Parking Assist Rear Sensor Right Corner Circuit Low Voltage/Open
B0961:08 Parking Assist Rear Sensor Right Corner Circuit Performance - Signal Invalid
B0961:18 Parking Assist Rear Sensor Right Corner Circuit Low Signal Amplitude
B0961:21 Parking Assist Rear Sensor Right Corner Circuit Incorrect Period
B0961:22 Parking Assist Rear Sensor Right Corner Circuit Too Short Low-Time
B0961:3A Parking Assist Rear Sensor Right Corner Circuit Incorrect Component Installed
B0961:3B Parking Assist Rear Sensor Right Corner Circuit Self-Test Malfunction
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0961 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0961 2017 GMC Sierra code?
Need more information on how to fix the B0961 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0961 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0961 2017 GMC Sierra Code
1. What does the OBDII code B0961 mean on a 2017 GMC Sierra?
The B0961 code indicates an issue with the Parking Assist Rear Sensor Right Corner Circuit, typically signaling a malfunction or communication issue with the right rear parking sensor.
2. What are the common symptoms of code B0961 on a 2017 GMC Sierra?
Symptoms include the parking assist system not functioning, warning messages or lights on the dashboard, and a lack of audible beeps when reversing near obstacles.
3. What causes the B0961 code to appear?
The code can be triggered by a faulty right rear parking sensor, damaged wiring or connections, water intrusion, or a malfunction in the parking assist module.
4. How do you diagnose the B0961 code on a 2017 GMC Sierra?
Diagnosis involves scanning the vehicle with an OBDII tool, visually inspecting the sensor and wiring, checking for corrosion or damage, and using a multimeter to test circuit continuity.
5. Can a dirty parking sensor cause the B0961 code?
Yes, dirt, debris, or ice on the sensor can block its operation and potentially trigger the code. Cleaning the sensor may resolve the issue.
6. How do you fix the B0961 code on a 2017 GMC Sierra?
Repairs may include replacing the faulty sensor, repairing damaged wiring or connectors, cleaning the sensor, or reprogramming the parking assist module if necessary.
7. How much does it cost to repair a B0961 code?
The cost varies but typically ranges from $100 to $300 for parts and labor, depending on whether the sensor, wiring, or module needs repair or replacement.
8. Can you drive with the B0961 code active on a 2017 GMC Sierra?
Yes, you can drive the vehicle, but the parking assist system may not function, increasing the risk of collisions during parking maneuvers.
9. Is the B0961 code covered under warranty on a 2017 GMC Sierra?
If your vehicle is still under warranty, the parking assist system may be covered, but it’s best to check with your dealer for specifics.
10. How can I prevent the B0961 code from occurring again?
Regularly clean the parking sensors, inspect wiring for damage, and avoid exposing the sensors to excessive water or pressure during car washes.
Discuss the causes and fixes for B0961 2017 GMC Sierra OBDII Code
Code B0961 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
