B0960 2018 GMC Sierra Code - Parking Assist Rear Sensor Right Middle Circuit
Quick Answer
The parking assist sensors are 3-wire ultrasonic sensors that are used to determine the distance between the vehicle and an object. Common causes include Faulty Parking Assist Rear Sensor Right Middle, Parking Assist Rear Sensor Right Middle harness is open or shorted, Parking Assist Rear Sensor Right Middle circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B0960 2018 GMC Sierra indicates Parking Assist Rear Sensor Right Middle Circuit.
- Common causes
- Common causes include Faulty Parking Assist Rear Sensor Right Middle, Parking Assist Rear Sensor Right Middle harness is open or shorted, Parking Assist Rear Sensor Right Middle circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B0960 2018 GMC Sierra Description
What are the Possible Causes of the DTC B0960 2018 GMC Sierra?
- Faulty Parking Assist Rear Sensor Right Middle
- Parking Assist Rear Sensor Right Middle harness is open or shorted
- Parking Assist Rear Sensor Right Middle circuit poor electrical connection
- Faulty Parking Assist Control Module
How to Fix the DTC B0960 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0960:02 Parking Assist Rear Sensor Right Middle Circuit Short to Ground
B0960:04 Parking Assist Rear Sensor Right Middle Circuit Open
B0960:06 Parking Assist Rear Sensor Right Middle Circuit Low Voltage/Open
B0960:08 Parking Assist Rear Sensor Right Middle Circuit Performance - Signal Invalid
B0960:18 Parking Assist Rear Sensor Right Middle Circuit Low Signal Amplitude
B0960:21 Parking Assist Rear Sensor Right Middle Circuit Incorrect Period
B0960:22 Parking Assist Rear Sensor Right Middle Circuit Too Short Low-Time
B0960:3A Parking Assist Rear Sensor Right Middle Circuit Incorrect Component Installed
B0960:3B Parking Assist Rear Sensor Right Middle Circuit Self-Test Malfunction
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0960 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0960 2018 GMC Sierra code?
Need more information on how to fix the B0960 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0960 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B0960 2018 GMC Sierra Code
1. What does the OBDII code B0960 mean for a 2018 GMC Sierra?
The B0960 code indicates an issue with the Parking Assist Rear Sensor Right Middle Circuit, typically caused by a malfunctioning sensor or wiring problem.
2. What are the symptoms of a B0960 code on a 2018 GMC Sierra?
Symptoms include a non-functional parking assist system, warning messages on the dashboard, and possibly audible alerts indicating a fault.
3. What causes the B0960 code on a GMC Sierra?
Common causes include a faulty right middle parking assist sensor, damaged wiring or connectors, or corrosion in the circuit.
4. How do I diagnose the B0960 code on my 2018 GMC Sierra?
Start by inspecting the parking sensor and its wiring for damage or corrosion, then use an OBDII scanner to confirm the fault and check for related codes.
5. Can a B0960 code cause other issues in my GMC Sierra?
While it primarily affects the parking assist system, unresolved issues can lead to decreased functionality or further electrical faults if the wiring is damaged.
6. How do I fix the B0960 code on a 2018 GMC Sierra?
Repairs may involve cleaning or replacing the right middle parking sensor, repairing damaged wiring, or addressing connector corrosion.
7. How much does it cost to fix a B0960 code on a GMC Sierra?
Costs can range from $50 to $200 for sensor replacement or wiring repair, depending on the extent of the damage and labor rates.
8. Can I drive my 2018 GMC Sierra with a B0960 code?
Yes, but the parking assist system may not function properly, which could make parking and maneuvering in tight spaces more difficult.
9. How do I prevent the B0960 code from recurring?
Regularly inspect and clean the parking sensors and connectors to prevent corrosion and ensure proper function.
10. Do I need a professional mechanic to fix the B0960 code?
While some DIYers can replace sensors or repair wiring, a professional mechanic is recommended for accurate diagnostics and repairs.
Discuss the causes and fixes for B0960 2018 GMC Sierra OBDII Code
Code B0960 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
