AutoCodes – GMC – B0228 GMC

B0228 GMC Code - Left Recirculate Position Feedback Circuit

Quick Answer

The Heating, Ventilation, and Air Conditioning (HVAC) control module controls the HVAC door actuators to regulate the airflow through the HVAC system. Common causes include Faulty Recirculate Actuator, Recirculate Actuator harness is open or shorted, Recirculate Actuator circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B0228 GMC indicates Left Recirculate Position Feedback Circuit.
Common causes: Common causes include Faulty Recirculate Actuator, Recirculate Actuator harness is open or shorted, Recirculate Actuator circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 15,857

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0228 GMC Description

The Heating, Ventilation, and Air Conditioning (HVAC) control module controls the HVAC door actuators to regulate the airflow through the HVAC system. Each actuator consists of an electric motor and a potentiometer. The module supplies a low reference and 5-volt reference source voltage to the potentiometer. The HVAC control module monitors the voltage drop across the potentiometer on the door position signal circuit. When the actuator shaft rotates, the voltage on the door position signal circuit changes. The control circuit uses either a 0, 2.5 or 5-volt signal to command the actuator movement. When the actuator is at rest, the control circuit value is 2.5 volts. A 0 or 5-volt control signal commands the actuator movement in opposite directions.

OBDII Code B0228 GMC - Left Recirculate Position Feedback Circuit - AutoCodes.com — B0228 GMC Code - Left Recirculate Position Feedback Circuit

What does this mean?

What are the Possible Causes of the DTC B0228 GMC?

Faulty Recirculate Actuator
Recirculate Actuator harness is open or shorted
Recirculate Actuator circuit poor electrical connection
Faulty Heating, Ventilation, and Air Conditioning (HVAC) Control Module

How to Fix the DTC B0228 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0228:02 Recirculate Position Feedback Circuit Short to Ground
B0228:05 Recirculate Position Feedback Circuit Short to Battery or Open
B0228:61 Recirculate Position Circuit Actuator Stuck

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0228 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0228 GMC code?

Need more information on how to fix the B0228 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0228 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

B0228 2014 GMC Sierra — Left Recirculate Position Feedback Circuit
B0228 2015 GMC Sierra — Left Recirculate Position Feedback Circuit
B0228 2016 GMC Sierra — Left Recirculate Position Feedback Circuit
B0228 2017 GMC Sierra — Left Recirculate Position Feedback Circuit
B0228 2018 GMC Sierra — Left Recirculate Position Feedback Circuit

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0228 GMC Code

1. What are the common symptoms of OBDII code B0228 GMC?

The common symptoms of OBDII code B0228 GMC, also known as Left Recirculate Position Feedback Circuit issue, include inconsistent air conditioning performance, unusual noises from the HVAC system, and the inability to control the recirculation of air inside the vehicle.

2. What typically causes the OBDII code B0228 GMC to trigger?

The OBDII code B0228 GMC is usually triggered by a faulty recirculation position sensor, damaged wiring or connectors in the recirculate position feedback circuit, or a failed HVAC control module.

3. How can I diagnose the OBDII code B0228 GMC?

To diagnose the OBDII code B0228 GMC, you can use an OBDII scanner to retrieve the specific trouble code. Additionally, a thorough inspection of the recirculation position sensor, circuit wiring, and HVAC control module is recommended to identify the root cause.

4. What is the recommended repair for OBDII code B0228 GMC?

The recommended repair for OBDII code B0228 GMC involves replacing the faulty recirculation position sensor, repairing any damaged wiring or connectors in the feedback circuit, or replacing the HVAC control module if necessary.

5. Can I drive my vehicle with the OBDII code B0228 GMC active?

While it may be possible to drive your vehicle with the OBDII code B0228 GMC active, it is not recommended as it can lead to poor HVAC performance and discomfort inside the vehicle. It is advised to address the issue promptly to ensure proper functioning of the HVAC system.

6. Are there any DIY tips for troubleshooting OBDII code B0228 GMC?

DIY tips for troubleshooting OBDII code B0228 GMC include checking for loose or damaged wiring connections, inspecting the recirculation position sensor for any visible damage, and ensuring proper calibration of the HVAC control module.

7. How much does it typically cost to repair OBDII code B0228 GMC?

The cost to repair OBDII code B0228 GMC can vary depending on the extent of the damage and the specific components that need to be replaced. On average, the repair cost can range from $100 to $300, including parts and labor.

8. What happens if I ignore the OBDII code B0228 GMC?

Ignoring the OBDII code B0228 GMC can result in continued poor HVAC performance, potential damage to other HVAC components, and discomfort while driving. It is recommended to address the issue promptly to avoid further complications.

9. Can extreme weather conditions affect the triggering of OBDII code B0228 GMC?

Yes, extreme weather conditions such as extreme heat or cold can potentially exacerbate issues related to the recirculate position feedback circuit, leading to the triggering of OBDII code B0228 GMC. Proper maintenance and timely repairs are essential to prevent such occurrences.

10. Is it necessary to reset the OBDII system after repairing OBDII code B0228 GMC?

Yes, it is recommended to reset the OBDII system after repairing OBDII code B0228 GMC to clear the trouble code and ensure that the issue has been successfully resolved. This can be done using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes.