AutoCodes – GMC – B0098 GMC

B0098 GMC Code - Passenger Air Bag Disable Switch

Quick Answer

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform a turn-on test to diagnose critical malfunctions within the inflatable restraint sensing and the diagnostic module itself. Common causes include Faulty Passenger Air Bag Disable Switch, Passenger Air Bag Disable Switch harness is open or shorted, Passenger Air Bag Disable Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0098 GMC indicates Passenger Air Bag Disable Switch.
Common causes: Common causes include Faulty Passenger Air Bag Disable Switch, Passenger Air Bag Disable Switch harness is open or shorted, Passenger Air Bag Disable Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,893

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 06, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0098 GMC Description

When the ignition switch is turned to ON, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will perform a turn-on test to diagnose critical malfunctions within the inflatable restraint sensing and the diagnostic module itself. The inflatable restraint sensing and diagnostic module continuously check the disable switch position switch and circuit defect by letting the regular voltage flow through the disable switch circuit and verifying the current.

OBDII Code B0098 GMC - Passenger Air Bag Disable Switch - AutoCodes.com — B0098 GMC Code - Passenger Air Bag Disable Switch

What does this mean?

What are the Possible Causes of the DTC B0098 GMC?

Faulty Passenger Air Bag Disable Switch
Passenger Air Bag Disable Switch harness is open or shorted
Passenger Air Bag Disable Switch circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0098 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0098:01 Passenger Air Bag Disable Switch Circuit Short Circuit to Battery
B0098:02 Passenger Air Bag Disable Switch Circuit Short Circuit to Ground
B0098:04 Passenger Air Bag Disable Switch Circuit Open

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0098 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0098 GMC code?

Need more information on how to fix the B0098 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0098 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

B0098 2014 GMC Sierra — Passenger Air Bag Disable Switch
B0098 2015 GMC Sierra — Passenger Air Bag Disable Switch
B0098 2016 GMC Sierra — Passenger Air Bag Disable Switch
B0098 2017 GMC Sierra — Passenger Air Bag Disable Switch
B0098 2018 GMC Sierra — Passenger Air Bag Disable Switch

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0098 GMC Code

1. What does OBDII code B0098 for GMC indicate?

The B0098 code specifically refers to an issue with the Passenger Air Bag Disable Switch circuit in a GMC vehicle.

2. What are the common symptoms of a B0098 error code in a GMC?

Common symptoms of the B0098 code may include an illuminated airbag warning light on the dashboard and possibly a message indicating an issue with the passenger airbag system.

3. What are the possible causes of the B0098 code in a GMC?

Possible causes of the B0098 code include a faulty Passenger Air Bag Disable Switch, wiring issues in the airbag system, or a malfunctioning airbag control module.

4. How can I diagnose the B0098 code in my GMC?

Diagnosing the B0098 code typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the Passenger Air Bag Disable Switch and related wiring, and conducting a thorough visual inspection of the airbag system components.

5. Can I continue driving my GMC with a B0098 error code?

It is not recommended to drive your GMC with a B0098 code present, as it indicates a potential issue with the passenger airbag system, which is crucial for occupant safety in the event of a collision.

6. How can I repair the B0098 code in my GMC?

Repairing the B0098 code may involve replacing the Passenger Air Bag Disable Switch, repairing any damaged wiring, or addressing any issues with the airbag control module as necessary.

7. Can I reset the B0098 code in my GMC without fixing the underlying issue?

While you can clear the B0098 code using an OBDII scanner, it is important to address the root cause of the problem to ensure the airbag system functions properly and maintains occupant safety.

8. Are there any safety precautions I should take when working on the airbag system related to the B0098 code?

When working on the airbag system in your GMC, always disconnect the vehicle's battery and wait at least 10 minutes before starting any repairs to prevent accidental airbag deployment.

9. How much does it typically cost to repair a B0098 error code in a GMC?

The cost of repairing a B0098 code can vary depending on the specific cause of the issue, but it may range from a few hundred dollars for parts and labor up to potentially over a thousand dollars for more extensive repairs.

10. Can a DIY enthusiast fix the B0098 code in a GMC, or is it best left to professionals?

While some DIY enthusiasts may have the skills to address the B0098 code, working on the airbag system requires specialized knowledge and tools, so it is generally recommended to have a professional technician diagnose and repair the issue for safety reasons.