B0097 Mercury Code - Right Side Restraints Sensor 2
Quick Answer
The Restraints Control Module (RCM) monitors all of Supplemental Restraint System (SRS) device connections. Common causes include Faulty Right Side Restraints Sensor 2, Right Side Restraints Sensor 2 harness is open or shorted, Right Side Restraints Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0097 Mercury indicates Right Side Restraints Sensor 2.
- Common causes
- Common causes include Faulty Right Side Restraints Sensor 2, Right Side Restraints Sensor 2 harness is open or shorted, Right Side Restraints Sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0097 Mercury Description
What are the Possible Causes of the DTC B0097 Mercury?
- Faulty Right Side Restraints Sensor 2
- Right Side Restraints Sensor 2 harness is open or shorted
- Right Side Restraints Sensor 2 circuit poor electrical connection
How to Fix the DTC B0097 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0097 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0097 Mercury code?
Need more information on how to fix the B0097 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0097 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0097 Mercury Code
1. What does OBDII code B0097 for Mercury "Right Side Restraints Sensor 2" mean?
The B0097 code indicates a problem with the right side restraint sensor 2 in the vehicle's airbag system.
2. What are the common symptoms of a B0097 Mercury trouble code?
Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the airbag system's functionality.
3. What are the possible causes of OBDII code B0097 in a Mercury?
Possible causes of the B0097 code include a faulty right side restraint sensor 2, damaged wiring or connectors in the airbag system, or a problem with the airbag control module.
4. How serious is an OBDII code B0097 in a Mercury vehicle?
The B0097 code relating to the right side restraints sensor 2 is a serious issue as it affects the proper functioning of the airbag system, which is crucial for occupant safety in the event of a collision.
5. Can I continue driving my Mercury with an active B0097 trouble code?
It is not recommended to drive the vehicle with an active B0097 code, as the airbag system may not deploy properly in the event of an accident, compromising occupant safety.
6. How can I diagnose and repair OBDII code B0097 in my Mercury?
Diagnosis typically involves using a diagnostic scanner to retrieve the code and then inspecting the right side restraint sensor 2, wiring, connectors, and airbag control module for any issues. Repair may involve replacing faulty components or repairing damaged wiring.
7. Is it possible to reset the B0097 code in a Mercury without repairing the issue?
While you can clear the code with a diagnostic scanner, it is not recommended to do so without addressing the underlying problem, as it will likely reoccur and compromise the airbag system's reliability.
8. Are there any safety precautions to take when working on the airbag system related to code B0097 in a Mercury?
When working on the airbag system, it is crucial to disconnect the vehicle's battery and wait at least 10 minutes before starting any repairs to prevent accidental airbag deployment.
9. How much does it typically cost to repair OBDII code B0097 in a Mercury?
The cost of repairing a B0097 code in a Mercury can vary depending on the specific issue, but it may involve replacing the right side restraint sensor 2, repairing wiring, or addressing problems with the airbag control module.
10. Can a DIY enthusiast with automotive knowledge fix the B0097 code in a Mercury?
While some experienced DIY enthusiasts may be able to diagnose and repair simple issues related to the B0097 code, working on the airbag system can be complex and dangerous. It is recommended to consult a professional technician for proper diagnosis and repair.
Discuss the causes and fixes for B0097 Mercury OBDII Code
Code B0097 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
