AutoCodes – GMC – B0092 GMC

B0092 GMC Code - Incorrect PPS Verification Identification

Quick Answer

When the ignition is turned on, Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. Common causes include Faulty Passenger Presence System (PPS) ECU, Passenger Presence System (PPS) ECU harness is open or shorted, Passenger Presence System (PPS) ECU circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0092 GMC indicates Incorrect PPS Verification Identification.
Common causes: Common causes include Faulty Passenger Presence System (PPS) ECU, Passenger Presence System (PPS) ECU harness is open or shorted, Passenger Presence System (PPS) ECU circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,301

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0092 GMC Description

When the ignition is turned on, Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. When SDM has completed power-up mode, SDM will establish communication with Passenger Presence System (PPS). PPS will respond by commanding both PASSENGER AIR BAG ON and OFF indicators, located in the rear view mirror, on for 5 seconds. SDM will transmit a request message to PPS to receive PPS verification identification. PPS will transmit verification identification to SDM and SDM will compare identification received to data stored in memory. SDM will also set the Diagnostic Trouble Code (DTC) B0092 to notify the driver that PPS has a current malfunction.

OBDII Code B0092 GMC - Incorrect PPS Verification Identification - AutoCodes.com — B0092 GMC Code - Incorrect PPS Verification Identification

What does this mean?

What are the Possible Causes of the DTC B0092 GMC?

Faulty Passenger Presence System (PPS) ECU
Passenger Presence System (PPS) ECU harness is open or shorted
Passenger Presence System (PPS) ECU circuit poor electrical connection

How to Fix the DTC B0092 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0092 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0092 GMC code?

Need more information on how to fix the B0092 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0092 GMC code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0092 GMC Code

1. What are the common symptoms of OBDII code B0092 GMC?

The common symptoms of code B0092 GMC include illuminated airbag warning light on the dashboard, disabled airbag system, and potential loss of power to the airbag system.

2. What does OBDII code B0092 GMC indicate?

OBDII code B0092 for GMC indicates Incorrect PPS (Passenger Presence System) Verification Identification, suggesting a fault in the passenger presence detection system.

3. What are the possible causes of OBDII code B0092 GMC?

Possible causes of code B0092 GMC include a faulty passenger presence sensor, wiring issues in the system, a malfunctioning airbag control module, or a calibration problem in the system.

4. How can I diagnose OBDII code B0092 GMC?

Diagnosing code B0092 GMC involves using a diagnostic scanner to retrieve the code, inspecting the passenger presence sensor and related wiring for any visible damage, and performing system tests to identify the root cause.

5. Can I continue driving with OBDII code B0092 GMC present?

It is not recommended to drive with OBDII code B0092 GMC present, as it indicates a potential issue with the airbag system, compromising passenger safety in the event of a collision.

6. How can I repair OBDII code B0092 GMC?

Repairing code B0092 GMC involves addressing the specific cause of the issue, which may include replacing the passenger presence sensor, repairing or replacing damaged wiring, recalibrating the system, or resetting the airbag control module.

7. Is it possible to reset OBDII code B0092 GMC without repairs?

Resetting code B0092 GMC without addressing the underlying issue is not recommended, as the problem will likely persist and could compromise the functionality of the airbag system.

8. Can a DIY enthusiast fix OBDII code B0092 GMC?

While some aspects of diagnosing and repairing code B0092 GMC may be within reach of experienced DIY enthusiasts, working on airbag systems can be complex and dangerous. It is advisable to seek professional assistance for such repairs.

9. How much does it cost to repair OBDII code B0092 GMC?

The cost of repairing code B0092 GMC can vary depending on the specific cause of the issue, the extent of the damage, and labor rates in your area. It is recommended to obtain quotes from reputable repair shops for an accurate estimate.

10. How long does it take to repair OBDII code B0092 GMC?

The repair time for code B0092 GMC can vary based on the complexity of the issue and the availability of parts. Some repairs may be completed in a few hours, while others may take longer if extensive troubleshooting is required.