AutoCodes – Chevrolet – B0086 2016 Chevrolet Silverado

B0086 2016 Chevrolet Silverado Code - Right Front Side Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. Common causes include Faulty Right Front Side Impact Sensor, Right Front Side Impact Sensor harness is open or shorted, Right Front Side Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0086 2016 Chevrolet Silverado indicates Right Front Side Impact Sensor.
Common causes: Common causes include Faulty Right Front Side Impact Sensor, Right Front Side Impact Sensor harness is open or shorted, Right Front Side Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 520

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 24, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0086 2016 Chevrolet Silverado Description

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the Inflatable Restraint Sensing and Diagnostic Module (SDM). The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module use the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0086 2016 Chevrolet Silverado - Right Front Side Impact Sensor - AutoCodes.com — B0086 2016 Chevrolet Silverado Code - Right Front Side Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0086 2016 Chevrolet Silverado?

Faulty Right Front Side Impact Sensor
Right Front Side Impact Sensor harness is open or shorted
Right Front Side Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0086 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0086:02 Right Front Side Impact Sensor Short to Ground
B0086:05 Right Front Side Impact Sensor High Voltage/Open
B0086:0F Right Front Side Impact Sensor Signal Erratic
B0086:39 Right Front Side Impact Sensor Internal Malfunction
B0086:3A Right Front Side Impact Sensor Incorrect Component Installed
B0086:71 Right Front Side Impact Sensor Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0086 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0086 2016 Chevrolet Silverado code?

Need more information on how to fix the B0086 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0086 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0086 2016 Chevrolet Silverado Code

1. What does OBDII code B0086 for a 2016 Chevrolet Silverado mean?

The B0086 code indicates a problem with the Right Front Side Impact Sensor on the vehicle.

2. What are the common symptoms of a Right Front Side Impact Sensor issue in a 2016 Chevrolet Silverado?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the deployment of the airbag in an accident.

3. What are the possible causes of OBDII code B0086 in a 2016 Chevrolet Silverado?

Possible causes include a faulty Right Front Side Impact Sensor, wiring issues, or a problem with the airbag control module.

4. How can I diagnose a Right Front Side Impact Sensor problem in my 2016 Chevrolet Silverado?

Diagnosis typically involves using a scan tool to retrieve the specific B0086 trouble code and then inspecting the sensor, wiring, and connections for any visible damage.

5. Can I continue driving my 2016 Chevrolet Silverado with OBDII code B0086?

It is not recommended to drive the vehicle with a B0086 code active, as the airbag system may not function properly in the event of a collision.

6. How can I repair a Right Front Side Impact Sensor issue in my 2016 Chevrolet Silverado?

Repairing the issue may involve replacing the faulty sensor, repairing damaged wiring, or resetting the airbag control module after the problem has been resolved.

7. Are there any safety concerns associated with a faulty Right Front Side Impact Sensor in a 2016 Chevrolet Silverado?

Yes, a malfunctioning sensor can affect the proper deployment of the airbag during a side impact collision, potentially compromising occupant safety.

8. How much does it cost to fix OBDII code B0086 on a 2016 Chevrolet Silverado?

The cost of repair can vary depending on the specific issue, but it typically involves the cost of parts and labor for sensor replacement or wiring repairs.

9. Can I reset the OBDII code B0086 in my 2016 Chevrolet Silverado myself?

While you can clear the code with an OBDII scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.

10. Is it recommended to seek professional help for diagnosing and repairing OBDII code B0086 on a 2016 Chevrolet Silverado?

Yes, it is advised to consult a qualified mechanic or dealership with experience in airbag systems to accurately diagnose and repair the Right Front Side Impact Sensor issue.