AutoCodesChevrolet – B0086 2014 Chevrolet Silverado

B0086 2014 Chevrolet Silverado Code - Right Front Side Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. Common causes include Faulty Right Front Side Impact Sensor, Right Front Side Impact Sensor harness is open or shorted, Right Front Side Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0086 2014 Chevrolet Silverado indicates Right Front Side Impact Sensor.
Common causes
Common causes include Faulty Right Front Side Impact Sensor, Right Front Side Impact Sensor harness is open or shorted, Right Front Side Impact Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 517
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 24, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0086 2014 Chevrolet Silverado Description

The impact sensors are equipped on vehicles to supplement the supplemental inflatable restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the Inflatable Restraint Sensing and Diagnostic Module (SDM). The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module use the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.
OBDII Code B0086 2014 Chevrolet Silverado - Right Front Side Impact Sensor - AutoCodes.com
B0086 2014 Chevrolet Silverado Code - Right Front Side Impact Sensor

What are the Possible Causes of the DTC B0086 2014 Chevrolet Silverado?

  • Faulty Right Front Side Impact Sensor
  • Right Front Side Impact Sensor harness is open or shorted
  • Right Front Side Impact Sensor circuit poor electrical connection
  • Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0086 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0086 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0086 2014 Chevrolet Silverado code?

Need more information on how to fix the B0086 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0086 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0086 2014 Chevrolet Silverado Code

1. What does OBDII code B0086 for a 2014 Chevrolet Silverado indicate?

The OBDII code B0086 in a 2014 Chevrolet Silverado specifically relates to the Right Front Side Impact Sensor.

2. What are the common symptoms of a faulty Right Front Side Impact Sensor in a 2014 Chevrolet Silverado?

Common symptoms of a faulty Right Front Side Impact Sensor may include the airbag warning light staying illuminated or the airbags not deploying properly during a collision.

3. What are the possible causes of OBDII code B0086 in a 2014 Chevrolet Silverado?

Possible causes of code B0086 in a 2014 Chevrolet Silverado can include a malfunctioning sensor, damaged wiring, or issues with the airbag control module.

4. How can I diagnose the Right Front Side Impact Sensor issue in my 2014 Chevrolet Silverado?

Diagnosing the issue with the Right Front Side Impact Sensor may require using a diagnostic scanner to retrieve the specific trouble code, visually inspecting the sensor and related wiring, and conducting continuity tests.

5. Can I repair a B0086 code in my 2014 Chevrolet Silverado at home?

While some basic troubleshooting steps can be done at home, repairing a B0086 code in a 2014 Chevrolet Silverado may require specialized tools and expertise. It is recommended to consult a professional mechanic for proper diagnosis and repair.

6. Is it safe to drive my 2014 Chevrolet Silverado with OBDII code B0086 triggered?

It is not advisable to drive your 2014 Chevrolet Silverado with a triggered B0086 code, as it indicates a potential issue with the Right Front Side Impact Sensor, which is crucial for airbag deployment in case of a collision.

7. How much does it cost to replace the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado?

The cost of replacing the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado can vary depending on the specific sensor model, labor costs, and whether genuine OEM parts are used.

8. Will disconnecting the battery reset the B0086 code in a 2014 Chevrolet Silverado?

Disconnecting the battery may reset the code temporarily, but if the underlying issue with the Right Front Side Impact Sensor is not addressed, the code is likely to reappear after some driving cycles.

9. Can a DIY enthusiast replace the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado?

Replacing the Right Front Side Impact Sensor in a 2014 Chevrolet Silverado may require specialized tools and knowledge of airbag systems. It is recommended to have this task performed by a qualified professional.

10. How often should the Right Front Side Impact Sensor be inspected in a 2014 Chevrolet Silverado?

It is recommended to have the Right Front Side Impact Sensor inspected during routine maintenance checks or whenever symptoms of an issue, such as the airbag warning light, arise in a 2014 Chevrolet Silverado.

Discuss the causes and fixes for B0086 2014 Chevrolet Silverado OBDII Code

Code B0086 2014 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play