AutoCodes – Chevrolet – B0083 2015 Chevrolet Silverado

B0083 2015 Chevrolet Silverado Code - Left Front Impact Sensor

Quick Answer

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0083 2015 Chevrolet Silverado indicates Left Front Impact Sensor.
Common causes: Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 378

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 23, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0083 2015 Chevrolet Silverado Description

The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. The impact sensors are electronic and are not part of the deployment loops, but instead provide inputs to the inflatable restraint sensing and diagnostic module. The impact sensors can assist in determining the severity of some frontal and side collisions. The Inflatable Restraint Sensing and Diagnostic Module (SDM) uses the input from the impact sensors to assist in determining the severity of a collision, further supporting air bag deployment. If the Inflatable Restraint Sensing and Diagnostic Module determines a deployment is warranted, the Inflatable Restraint Sensing and Diagnostic Module will cause current to flow through the deployment loops deploying the air bags.

OBDII Code B0083 2015 Chevrolet Silverado - Left Front Impact Sensor - AutoCodes.com — B0083 2015 Chevrolet Silverado Code - Left Front Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0083 2015 Chevrolet Silverado?

Faulty Left Front Impact Sensor
Left Front Impact Sensor harness is open or shorted
Left Front Impact Sensor circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0083 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0083:02 Left Front Impact Sensor Short to Ground
B0083:05 Left Front Impact Sensor Short to Battery or Open
B0083:08 Left Front Impact Sensor Signal Invalid
B0083:0F Left Front Impact Sensor Erratic
B0083:39 Left Front Impact Sensor Internal Electronic Failure
B0083:3A Left Front Impact Sensor Incorrect Component Installed
B0083:71 Left Front Impact Sensor Invalid Serial Data Received

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0083 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0083 2015 Chevrolet Silverado code?

Need more information on how to fix the B0083 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0083 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0083 2015 Chevrolet Silverado Code

1. What does OBDII code B0083 for a 2015 Chevrolet Silverado indicate?

The code B0083 refers to a problem with the left front impact sensor in a 2015 Chevrolet Silverado.

2. What are the common symptoms of a faulty left front impact sensor in a 2015 Chevrolet Silverado?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system deployment.

3. What are the possible causes of OBDII code B0083 in a 2015 Chevrolet Silverado?

The code B0083 can be triggered by a malfunction in the left front impact sensor itself, wiring issues, or a problem with the airbag control module.

4. How can I diagnose a left front impact sensor issue in my 2015 Chevrolet Silverado?

Diagnosing the issue typically involves using a diagnostic scanner to retrieve the specific trouble code, inspecting the sensor and its wiring for damage, and checking for any loose connections.

5. Can I continue driving my 2015 Chevrolet Silverado with OBDII code B0083?

It is not recommended to drive the vehicle with a faulty left front impact sensor, as it may compromise the proper functioning of the airbag system in the event of a collision.

6. How can I repair a left front impact sensor issue in a 2015 Chevrolet Silverado?

Repairing the issue may involve replacing the left front impact sensor, repairing damaged wiring, or reprogramming the airbag control module to clear the code.

7. Is it possible to reset the OBDII code B0083 in a 2015 Chevrolet Silverado without fixing the underlying issue?

Resetting the code without addressing the root cause will only temporarily clear the warning light, as the issue will likely trigger the code again until properly repaired.

8. Are there any safety precautions to take when working on the airbag system in a 2015 Chevrolet Silverado?

When working on the airbag system, always disconnect the battery and wait for at least 10 minutes to allow residual power to dissipate before starting any repairs to prevent accidental airbag deployment.

9. What is the typical cost to repair a left front impact sensor issue in a 2015 Chevrolet Silverado?

The cost of repair can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

10. Can a DIY enthusiast with some automotive knowledge repair a left front impact sensor problem in a 2015 Chevrolet Silverado?

While some DIY enthusiasts may have the skills to diagnose and replace a left front impact sensor, working on the airbag system requires precision and specialized knowledge, so it is recommended to consult a professional technician for such repairs.