B0083 2014 GMC Sierra Code - Left Front Impact Sensor
Quick Answer
The impact sensors are equipped on vehicles to supplement the Supplemental Inflatable Restraint (SIR) system performance. Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0083 2014 GMC Sierra indicates Left Front Impact Sensor.
- Common causes
- Common causes include Faulty Left Front Impact Sensor, Left Front Impact Sensor harness is open or shorted, Left Front Impact Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0083 2014 GMC Sierra Description
What are the Possible Causes of the DTC B0083 2014 GMC Sierra?
- Faulty Left Front Impact Sensor
- Left Front Impact Sensor harness is open or shorted
- Left Front Impact Sensor circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0083 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0083:05 Left Front Impact Sensor Short to Battery or Open
B0083:08 Left Front Impact Sensor Signal Invalid
B0083:0F Left Front Impact Sensor Erratic
B0083:39 Left Front Impact Sensor Internal Electronic Failure
B0083:3A Left Front Impact Sensor Incorrect Component Installed
B0083:71 Left Front Impact Sensor Invalid Serial Data Received
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0083 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0083 2014 GMC Sierra code?
Need more information on how to fix the B0083 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0083 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0083 2014 GMC Sierra Code
1. What does the OBDII code B0083 for a 2014 GMC Sierra mean?
The code B0083 indicates a problem with the left front impact sensor in a 2014 GMC Sierra.
2. What are the common symptoms of a left front impact sensor issue in a 2014 GMC Sierra?
Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the airbag system deployment.
3. What are possible causes of the B0083 OBDII code in a 2014 GMC Sierra?
The B0083 code can be triggered by a faulty left front impact sensor, wiring issues, or a problem with the airbag control module.
4. How serious is a left front impact sensor problem in a 2014 GMC Sierra?
A left front impact sensor issue is a safety concern as it can affect the proper functioning of the airbag system in the event of a collision.
5. Can I continue driving my 2014 GMC Sierra with the B0083 code present?
It is not recommended to drive the vehicle with the B0083 code active, as it may compromise the effectiveness of the airbag system.
6. How can I diagnose a left front impact sensor problem in my 2014 GMC Sierra?
Diagnosing a left front impact sensor problem typically involves using a scan tool to read the OBDII codes and inspecting the sensor and related wiring for any visible damage.
7. What are the repair options for fixing the B0083 OBDII code in a 2014 GMC Sierra?
Repair options may include replacing the left front impact sensor, repairing any damaged wiring, or reprogramming the airbag control module.
8. Can I reset the B0083 code in my 2014 GMC Sierra myself?
While you can attempt to clear the code using an OBDII scanner, it is important to address the underlying issue causing the code to prevent future safety risks.
9. How much does it typically cost to repair a left front impact sensor issue in a 2014 GMC Sierra?
The cost of repairing a left front impact sensor problem can vary depending on the extent of the damage and whether professional labor is required.
10. Are there any recalls or service bulletins related to the B0083 code in a 2014 GMC Sierra?
It is recommended to check with a GMC dealership or the National Highway Traffic Safety Administration (NHTSA) website for any relevant recalls or service bulletins related to the B0083 code in a 2014 GMC Sierra.
Discuss the causes and fixes for B0083 2014 GMC Sierra OBDII Code
Code B0083 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
