AutoCodes – Pontiac – B0082 Pontiac

B0082 Pontiac Code - Discard Right Front/Passenger Side Impact Sensor

Quick Answer

The Inflatable Restraint Side Impact Sensor (SIS) utilizes a unidirectional 2-wire circuit. Common causes include Faulty Discard Right Front/Passenger Side Impact Sensor (SIS), Discard Right Front/Passenger Side Impact Sensor (SIS) harness is open or shorted, Discard Right Front/Passenger Side Impact Sensor (SIS) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0082 Pontiac indicates Discard Right Front/Passenger Side Impact Sensor.
Common causes: Common causes include Faulty Discard Right Front/Passenger Side Impact Sensor (SIS), Discard Right Front/Passenger Side Impact Sensor (SIS) harness is open or shorted, Discard Right Front/Passenger Side Impact Sensor (SIS) circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,427

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 23, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0082 Pontiac Description

The Inflatable Restraint Side Impact Sensor (SIS) utilizes a unidirectional 2-wire circuit. The SIS modulates current on the interface to send ID, State of Health, and deployment commands to the Inflatable Restraint Sensing and Diagnostic Module (SDM). The SDM serves as a power source and a ground for the SIS. When the ignition is turned on and input power from the SDM is first detected, the SIS responds by performing internal diagnostics and sending an ID to the SDM. The SDM considers the ID to be valid if the response time is less than 5 seconds. The SIS continually communicates status messages to the SDM, which determines if a fault is present in the SIS circuit. When a fault is detected, the SDM resets the SIS twice by removing and reapplying power. If the fault is still present, the SDM will set a Diagnostic Trouble Code (DTC).

OBDII Code B0082 Pontiac - Discard Right Front/Passenger Side Impact Sensor - AutoCodes.com — B0082 Pontiac Code - Discard Right Front/Passenger Side Impact Sensor

What does this mean?

What are the Possible Causes of the DTC B0082 Pontiac?

Faulty Discard Right Front/Passenger Side Impact Sensor (SIS)
Discard Right Front/Passenger Side Impact Sensor (SIS) harness is open or shorted
Discard Right Front/Passenger Side Impact Sensor (SIS) circuit poor electrical connection
Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0082 Pontiac?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0082 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0082 Pontiac code?

Need more information on how to fix the B0082 Pontiac code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0082 Pontiac code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0082 Pontiac Code

1. What are the common symptoms of OBDII code B0082 in a Pontiac?

The common symptoms of code B0082 include the airbag warning light illuminating on the dashboard and potential issues with the right front/passenger side impact sensor.

2. What does the OBDII code B0082 Pontiac mean?

The code B0082 indicates a problem with the right front/passenger side impact sensor in a Pontiac vehicle.

3. What are the possible causes of the OBDII code B0082 in a Pontiac?

Possible causes of code B0082 include a faulty impact sensor, wiring issues, or a problem with the airbag control module.

4. How can I diagnose the OBDII code B0082 in my Pontiac?

To diagnose code B0082, you can use an OBDII scanner to retrieve the specific fault codes, inspect the impact sensor and related wiring for damage, and test the sensor's functionality.

5. Can I still drive my Pontiac with the OBDII code B0082?

It is not recommended to drive your Pontiac with an active B0082 code, as it indicates a potential issue with the airbag system, which may affect its functionality in the event of a collision.

6. How can I repair the OBDII code B0082 in my Pontiac?

Repairing code B0082 may involve replacing the right front/passenger side impact sensor, repairing any damaged wiring, or resetting the airbag control module.

7. Are there any safety concerns associated with the OBDII code B0082 in a Pontiac?

Yes, code B0082 relates to the airbag system's integrity, so it is crucial to address this issue promptly to ensure the airbags deploy correctly in case of an accident.

8. Can I reset the OBDII code B0082 in my Pontiac without fixing the underlying issue?

While you can reset the code temporarily, it will likely reappear if the root cause, such as a faulty impact sensor, is not addressed.

9. How much does it typically cost to repair the OBDII code B0082 in a Pontiac?

The cost of repairing code B0082 can vary depending on the specific issue, but it may involve parts and labor expenses ranging from $100 to $500 or more.

10. Is it possible to prevent the OBDII code B0082 from occurring in my Pontiac?

Regular maintenance and inspections of the airbag system, including the impact sensors, can help prevent issues like code B0082 from occurring in your Pontiac.