AutoCodes – Mercury – B0082 Mercury

B0082 Mercury Code - Passenger Seatbelt Load Limiter Deployment Control

Quick Answer

The Restraints Control Module (RCM) analyzes the deployment loop resistance to determine if a fault exists. Common causes include Faulty Passenger Seatbelt Load Limiter Deployment, Passenger Seatbelt Load Limiter Deployment harness is open or shorted, Passenger Seatbelt Load Limiter Deployment circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0082 Mercury indicates Passenger Seatbelt Load Limiter Deployment Control.
Common causes: Common causes include Faulty Passenger Seatbelt Load Limiter Deployment, Passenger Seatbelt Load Limiter Deployment harness is open or shorted, Passenger Seatbelt Load Limiter Deployment circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,901

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 23, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0082 Mercury Description

The Restraints Control Module (RCM) analyzes the deployment loop resistance to determine if a fault exists. The value displayed in the Parameter Identification (PID) is the deployment loop resistance measured by the Restraints Control Module (RCM). If the value displayed is lower or higher than the desired range, the Restraints Control Module (RCM) can set a Diagnostic Trouble Code (DTC). As the deployment loop resistance drifts farther outside the desired range, the chance for a Diagnostic Trouble Code (DTC) increases. Small variations in resistance can occur due to the effect of road vibrations on terminal fit. Crimps and terminals can be affected by stress and harness movement and can cause an increase in resistance due to wire strain. These variables can result in an intermittent fault. For this reason, the test requires the Parameter Identification (PID) value to be within the desired range before the fault is considered repaired, regardless if the module is reporting an on-demand Diagnostic Trouble Code (DTC) at the time of diagnosis. Following this direction helps make sure that minor changes in resistance do not create a repeat concern.

OBDII Code B0082 Mercury - Passenger Seatbelt Load Limiter Deployment Control - AutoCodes.com — B0082 Mercury Code - Passenger Seatbelt Load Limiter Deployment Control

What does this mean?

What are the Possible Causes of the DTC B0082 Mercury?

Faulty Passenger Seatbelt Load Limiter Deployment
Passenger Seatbelt Load Limiter Deployment harness is open or shorted
Passenger Seatbelt Load Limiter Deployment circuit poor electrical connection
Faulty Restraints Control Module (RCM)

How to Fix the DTC B0082 Mercury?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0082:11 Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Ground
B0082:12 Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Battery
B0082:13 Passenger Seatbelt Load Limiter Deployment Control: Circuit Open
B0082:1A Passenger Seatbelt Load Limiter Deployment Control: Circuit Resistance Below Threshold

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0082 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0082 Mercury code?

Need more information on how to fix the B0082 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0082 Mercury code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0082 Mercury Code

1. What are the common symptoms of OBDII code B0082 in a Mercury related to the passenger seatbelt load limiter deployment control?

- Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the passenger seatbelt system.

2. What could cause the OBDII code B0082 in a Mercury?

- The code B0082 typically indicates a fault in the passenger seatbelt load limiter deployment control system, which could be caused by a malfunctioning seatbelt sensor, wiring issues, or a faulty control module.

3. How can I diagnose the OBDII code B0082 in my Mercury?

- Diagnosing the B0082 code usually involves using an OBDII scanner to retrieve the specific fault code, inspecting the passenger seatbelt system for any visible damage, and conducting electrical tests to pinpoint the issue.

4. Is it safe to drive my Mercury with the OBDII code B0082 present?

- It is not recommended to drive the vehicle with the B0082 code active, as it indicates a potential problem with the passenger seatbelt system, which is crucial for occupant safety in the event of a collision.

5. Can I reset the OBDII code B0082 in my Mercury without fixing the underlying issue?

- While you can clear the code using an OBDII scanner, it is important to address the root cause of the problem to ensure the passenger seatbelt load limiter deployment control functions properly in case of an accident.

6. How much does it typically cost to repair the OBDII code B0082 in a Mercury?

- The cost of repairing the B0082 code can vary depending on the specific cause of the issue, but it may involve replacing faulty components, repairing wiring, or reprogramming the control module. Costs can range from a few hundred to over a thousand dollars.

7. Are there any DIY repair tips for fixing the OBDII code B0082 in a Mercury?

- DIY repair for the B0082 code may involve checking and securing the seatbelt connections, inspecting for any visible damage or loose wiring, and ensuring all components are properly connected. However, if in doubt, it's best to consult a professional mechanic.

8. Can the OBDII code B0082 in a Mercury be a recurring issue after repair?

- If the underlying cause of the B0082 code is not properly addressed during repair, it is possible for the issue to recur. Thorough diagnosis and repair by a qualified technician are essential to prevent the problem from coming back.

9. Is the OBDII code B0082 specific to Mercury vehicles only?

- The OBDII code B0082 related to the passenger seatbelt load limiter deployment control can be found in various vehicle makes and models, not exclusive to Mercury. It indicates a similar issue with the seatbelt system across different manufacturers.

10. How long does it typically take to repair the OBDII code B0082 in a Mercury?

- The repair time for the B0082 code can vary depending on the exact cause of the problem and the complexity of the repair. It may take a few hours to a full day for diagnosis and repair by a qualified mechanic.