B0080 2015 Chevrolet Silverado Code - Passenger Seat Position Sensor Circuit
Quick Answer
The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0080 2015 Chevrolet Silverado indicates Passenger Seat Position Sensor Circuit.
- Common causes
- Common causes include Faulty Passenger Seat Position Sensor, Passenger Seat Position Sensor harness is open or shorted, Passenger Seat Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0080 2015 Chevrolet Silverado Description
What are the Possible Causes of the DTC B0080 2015 Chevrolet Silverado?
- Faulty Passenger Seat Position Sensor
- Passenger Seat Position Sensor harness is open or shorted
- Passenger Seat Position Sensor circuit poor electrical connection
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0080 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0080:02 Passenger Seat Position Sensor Circuit Short to Ground
B0080:04 Passenger Seat Position Sensor Circuit Open
B0080:05 Passenger Seat Position Sensor Circuit High Voltage or Open
B0080:06 Passenger Seat Position Sensor Circuit Low Voltage or Open
B0080:08 Passenger Seat Position Sensor Circuit Performance-Signal Invalid
B0080:0C Passenger Seat Position Sensor Circuit Low Current
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0080 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0080 2015 Chevrolet Silverado code?
Need more information on how to fix the B0080 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0080 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0080 2015 Chevrolet Silverado Code
1. What are common symptoms of OBDII code B0080 in a 2015 Chevrolet Silverado?
The most common symptoms include the airbag warning light turning on and a message indicating an issue with the passenger seat airbag sensor.
2. What can cause the OBDII code B0080 in a 2015 Chevrolet Silverado?
The code B0080 is typically triggered by a malfunction in the passenger seat position sensor circuit, which may be due to a faulty sensor, wiring issues, or a poor connection.
3. How serious is the OBDII code B0080 in a 2015 Chevrolet Silverado?
The B0080 code indicates a potential problem with the passenger seat airbag system, which could affect its proper deployment in case of an accident. It is important to address this issue promptly.
4. Can I still drive my 2015 Chevrolet Silverado with the OBDII code B0080?
It is not recommended to drive the vehicle with the B0080 code present, as it may compromise the functionality of the passenger seat airbag system. Have the issue diagnosed and repaired as soon as possible.
5. How can I diagnose the OBDII code B0080 in my 2015 Chevrolet Silverado?
Diagnosing the B0080 code requires specialized OBDII scan tools to read the fault codes stored in the vehicle's computer system. A professional mechanic can perform a thorough diagnosis to pinpoint the exact cause.
6. What is the typical repair for the OBDII code B0080 in a 2015 Chevrolet Silverado?
The repair for the B0080 code usually involves inspecting and repairing the passenger seat position sensor circuit, which may include replacing the sensor, repairing wiring issues, or fixing poor connections.
7. Can I reset the OBDII code B0080 in my 2015 Chevrolet Silverado myself?
While you can clear the code using an OBDII scanner, it is crucial to address the underlying issue causing the code to prevent it from reoccurring. It's recommended to have a professional diagnose and repair the problem.
8. How much does it cost to fix the OBDII code B0080 in a 2015 Chevrolet Silverado?
The cost of repairing the B0080 code can vary depending on the exact cause of the issue and the labor rates in your area. It's advisable to obtain quotes from different mechanics or dealerships.
9. Are there any DIY tips for troubleshooting the OBDII code B0080 in a 2015 Chevrolet Silverado?
While basic checks like inspecting the seat sensor connector and wiring for damage can be done, diagnosing and repairing the B0080 code usually requires specialized tools and expertise. It's best to consult a professional mechanic.
10. How can I prevent the OBDII code B0080 from appearing in my 2015 Chevrolet Silverado?
To prevent the B0080 code, it's essential to ensure that the passenger seat position sensor and its circuit are regularly inspected for any signs of wear or damage. Promptly addressing any issues can help avoid triggering the code.
Discuss the causes and fixes for B0080 2015 Chevrolet Silverado OBDII Code
Code B0080 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
