AutoCodesHummer – B0079 Hummer

B0079 Hummer Code - Driver Seat Position Sensor Circuit

Quick Answer

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. Common causes include Faulty Driver Seat Position Sensor, Driver Seat Position Sensor harness is open or shorted, Driver Seat Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0079 Hummer indicates Driver Seat Position Sensor Circuit.
Common causes
Common causes include Faulty Driver Seat Position Sensor, Driver Seat Position Sensor harness is open or shorted, Driver Seat Position Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 2,978
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 17, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0079 Hummer Description

The seat position sensor is used to determine the proximity of the front driver or passenger seat position with respect to the front air bag. There are two states of seat position, forward and rearward. The seat position sensor interfaces with the Inflatable Restraint Sensing and Diagnostic Module (SDM) and allows the inflatable restraint sensing and diagnostic module to disable stage 2 of the air bag for a front seat that is forward of the forward/rearward point in seat track. The seat position sensor provides two current ranges, one range for the forward seat position and one for the rearward seat position. When the Inflatable Restraint Sensing and Diagnostic Module receives input from a seat position sensor that the seat is rearward, and the inflatable restraint sensing and diagnostic module will not disable stage 2 deployment. When the seat is forward, the Inflatable Restraint Sensing and Diagnostic Module will disable stage 2 deployment. The inflatable restraint sensing and diagnostic module monitors the seat position sensor circuit and if a fault is detected, the Inflatable Restraint Sensing and Diagnostic Module will set Diagnostic Trouble Code (DTC) B0079 and disable stage 2 frontal deployment.
OBDII Code B0079 Hummer - Driver Seat Position Sensor Circuit - AutoCodes.com
B0079 Hummer Code - Driver Seat Position Sensor Circuit

What are the Possible Causes of the DTC B0079 Hummer?

  • Faulty Driver Seat Position Sensor
  • Driver Seat Position Sensor harness is open or shorted
  • Driver Seat Position Sensor circuit poor electrical connection
  • Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0079 Hummer?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0079 Hummer code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0079 Hummer code?

Need more information on how to fix the B0079 Hummer code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0079 Hummer code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0079 Hummer Code

1. What are the common symptoms of OBDII code B0079 in a Hummer related to the driver seat position sensor circuit?

- Common symptoms include inaccurate seat position readings, malfunctioning seat memory settings, and warning lights on the dashboard.

2. What are the typical causes of OBDII code B0079 in a Hummer?

- The code B0079 in a Hummer is often caused by a faulty driver seat position sensor, damaged wiring harness, or a problem with the seat control module.

3. How can I diagnose the driver seat position sensor circuit issue in my Hummer?

- Diagnose the issue by checking the wiring connections, inspecting the sensor for physical damage, and using an OBDII scanner to read the specific error codes.

4. Can I repair the driver seat position sensor circuit issue in my Hummer on my own?

- Depending on your skill level, you may be able to repair the issue by replacing the faulty sensor, repairing damaged wiring, or resetting the seat control module.

5. Are there any safety concerns associated with OBDII code B0079 in a Hummer?

- While the code itself does not pose a safety risk, it is important to address the issue promptly to ensure proper functioning of the driver seat adjustments and potential airbag deployment in case of an accident.

6. How much does it typically cost to fix the driver seat position sensor circuit issue in a Hummer?

- The cost of fixing the issue can vary depending on the extent of the problem, but it may range from $100 to $300 for parts and labor.

7. Will OBDII code B0079 cause my Hummer to fail a state emissions inspection?

- OBDII code B0079 is not directly related to emissions, so it should not cause your Hummer to fail a state emissions inspection.

8. Can driving with OBDII code B0079 in my Hummer cause further damage to the vehicle?

- Driving with the code may not cause immediate damage, but it is recommended to address the issue promptly to prevent any potential issues with the driver seat functionality.

9. How long does it take to repair the driver seat position sensor circuit issue in a Hummer?

- The repair time can vary depending on the exact cause of the issue, but it typically takes between 1 to 3 hours for a professional technician to diagnose and fix the problem.

10. Is it possible to reset the OBDII code B0079 in a Hummer without fixing the underlying issue?

- While you can clear the code using an OBDII scanner, it is important to address the root cause of the problem to prevent the code from reappearing in the future.

Discuss the causes and fixes for B0079 Hummer OBDII Code

Code B0079 Hummer comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play