AutoCodesChevrolet – B0071 2015 Chevrolet Silverado

B0071 2015 Chevrolet Silverado Code - Passenger Seat Belt Tension Sensor Circuit

Quick Answer

The seat belt tension sensor is a sensor mounted on the passenger seat belt retractor and provides input to the Passenger Presence Module. Common causes include Faulty Passenger Seat Belt Retractor (Passenger Seat Belt Tension Sensor), Passenger Seat Belt Retractor harness is open or shorted, Passenger Seat Belt Retractor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0071 2015 Chevrolet Silverado indicates Passenger Seat Belt Tension Sensor Circuit.
Common causes
Common causes include Faulty Passenger Seat Belt Retractor (Passenger Seat Belt Tension Sensor), Passenger Seat Belt Retractor harness is open or shorted, Passenger Seat Belt Retractor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 553
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 17, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0071 2015 Chevrolet Silverado Description

The seat belt tension sensor is a sensor mounted on the passenger seat belt retractor and provides input to the Passenger Presence Module. When an infant car seat is properly restrained on the front passenger seat, the seat belt is tightly secured through the car seat. The seat belt pulls on the tension sensor and changes the voltage signal to the Passenger Presence Module. The Passenger Presence Module monitors the belt tension sensor signal circuit and if a fault is detected, the Diagnostic Trouble Code (DTC) will be set. When the Passenger Presence Module detects this DTC, it will send out a serial data message, and the Inflatable Restraint Sensing and Diagnostic Module will notify the customer of the enable/disable status by illuminating the OFF indicator on the PASSENGER AIR BAG ON/OFF indicators. The Inflatable Restraint Sensing and Diagnostic Module (SDM) will then suppress the deployment of the passenger instrument panel air bag and illuminate the AIR BAG indicator.
OBDII Code B0071 2015 Chevrolet Silverado - Passenger Seat Belt Tension Sensor Circuit - AutoCodes.com
B0071 2015 Chevrolet Silverado Code - Passenger Seat Belt Tension Sensor Circuit

What are the Possible Causes of the DTC B0071 2015 Chevrolet Silverado?

  • Faulty Passenger Seat Belt Retractor (Passenger Seat Belt Tension Sensor)
  • Passenger Seat Belt Retractor harness is open or shorted
  • Passenger Seat Belt Retractor circuit poor electrical connection
  • Faulty Passenger Presence Module

How to Fix the DTC B0071 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0071 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0071 2015 Chevrolet Silverado code?

Need more information on how to fix the B0071 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0071 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0071 2015 Chevrolet Silverado Code

1. What does OBDII code B0071 for a 2015 Chevrolet Silverado indicate?

The code B0071 relates to a problem with the passenger seat belt tension sensor circuit in a 2015 Chevrolet Silverado.

2. What are the common symptoms of a B0071 code in a 2015 Chevrolet Silverado?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the passenger seat belt system.

3. What are the possible causes of a B0071 code in a 2015 Chevrolet Silverado?

Causes can include a faulty passenger seat belt tension sensor, damaged wiring or connectors in the circuit, or a malfunctioning airbag control module.

4. How can I diagnose a B0071 code in my 2015 Chevrolet Silverado?

Diagnosis typically involves using an OBDII scanner to retrieve the specific fault code, inspecting the seat belt tension sensor and related components, and conducting tests to pinpoint the issue.

5. Can I still drive my 2015 Chevrolet Silverado with a B0071 code?

It is not recommended to drive the vehicle with an active B0071 code, as it may indicate a safety concern with the passenger seat belt system or airbag deployment.

6. How can I repair a B0071 code in my 2015 Chevrolet Silverado?

Repair options include replacing the faulty seat belt tension sensor, repairing damaged wiring or connectors, or resetting the airbag control module after fixing the issue.

7. Is it safe to reset the B0071 code in a 2015 Chevrolet Silverado without fixing the underlying problem?

Resetting the code without addressing the root cause can temporarily clear the warning light, but the issue may persist and compromise the safety systems of the vehicle.

8. Can a DIY enthusiast fix a B0071 code in a 2015 Chevrolet Silverado?

While some basic troubleshooting steps can be done by a DIY enthusiast, diagnosing and repairing a B0071 code often requires specialized tools and expertise best handled by a professional mechanic.

9. How much does it typically cost to repair a B0071 code in a 2015 Chevrolet Silverado?

Costs can vary depending on the specific cause of the code, but repairs for a B0071 code may range from a few hundred to over a thousand dollars, considering parts and labor.

10. How often does the B0071 code occur in a 2015 Chevrolet Silverado?

The B0071 code is not extremely common but can occur due to various factors, such as sensor wear, electrical issues, or impact damage to the seat belt system. Regular maintenance can help prevent such issues.

Discuss the causes and fixes for B0071 2015 Chevrolet Silverado OBDII Code

Code B0071 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play