AutoCodes – Lincoln – B0061 Lincoln

B0061 Lincoln Code - Passenger Seatbelt Tension Sensor

Quick Answer

The Belt Tension Sensor (BTS) operates in conjunction with the Occupant Classification System (OCS). Common causes include Faulty Passenger Seatbelt Tension Sensor (part of front passenger safety belt), Passenger Seatbelt Tension Sensor harness is open or shorted, Passenger Seatbelt Tension Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0061 Lincoln indicates Passenger Seatbelt Tension Sensor.
Common causes: Common causes include Faulty Passenger Seatbelt Tension Sensor (part of front passenger safety belt), Passenger Seatbelt Tension Sensor harness is open or shorted, Passenger Seatbelt Tension Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,589

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0061 Lincoln Description

The Belt Tension Sensor (BTS) operates in conjunction with the Occupant Classification System (OCS). The Occupant Classification System (OCS) interprets a variable voltage signal provided by the Belt Tension Sensor (BTS) to identify the possible presence of a child safety seat in the front passenger seat. The voltage output of the Belt Tension Sensor (BTS) is proportional to the amount of tension applied to the sensor by the belt: no belt tension causes a low voltage (approximately 0.95 volt) to be output, and high belt tension causes a high voltage (approximately 3.8 volts) to be returned to the Occupant Classification System Module (OCSM).

OBDII Code B0061 Lincoln - Passenger Seatbelt Tension Sensor - AutoCodes.com — B0061 Lincoln Code - Passenger Seatbelt Tension Sensor

What does this mean?

What are the Possible Causes of the DTC B0061 Lincoln?

Faulty Passenger Seatbelt Tension Sensor (part of front passenger safety belt)
Passenger Seatbelt Tension Sensor harness is open or shorted
Passenger Seatbelt Tension Sensor circuit poor electrical connection

How to Fix the DTC B0061 Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0061:11 Passenger Seatbelt Tension Sensor: Circuit Short to Ground
B0061:12 Passenger Seatbelt Tension Sensor: Circuit Short to Battery
B0061:13 Passenger Seatbelt Tension Sensor: Circuit Open
B0061:1C Passenger Seatbelt Tension Sensor: Circuit Voltage Out of Range
B0061:49 Passenger Seatbelt Tension Sensor: Internal Electronic Failure

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0061 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0061 Lincoln code?

Need more information on how to fix the B0061 Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0061 Lincoln code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0061 Lincoln Code

1. What are common symptoms of OBDII code B0061 (Lincoln) related to the passenger seatbelt tension sensor?

The common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the passenger seatbelt system.

2. What can cause OBDII code B0061 (Lincoln) to trigger for the passenger seatbelt tension sensor?

The code is typically triggered by a fault in the passenger seatbelt tension sensor, which may be caused by wiring issues, sensor malfunction, or a faulty connection.

3. How can I diagnose the OBDII code B0061 (Lincoln) for the passenger seatbelt tension sensor?

Diagnosis involves using an OBDII scanner to retrieve the specific code, followed by inspecting the wiring, connectors, and sensor itself for any visible damage or issues.

4. What are the potential risks of driving with OBDII code B0061 (Lincoln) related to the passenger seatbelt tension sensor?

Driving with this code present may compromise the effectiveness of the passenger seatbelt system and the proper deployment of the airbags in case of an accident.

5. Can I repair OBDII code B0061 (Lincoln) for the passenger seatbelt tension sensor myself?

While it's possible to troubleshoot wiring and connections, replacing the passenger seatbelt tension sensor may require specialized tools and expertise, best left to professionals.

6. How much does it cost to repair OBDII code B0061 (Lincoln) for the passenger seatbelt tension sensor?

The cost of repair can vary depending on the extent of the issue. It may range from a few hundred dollars for sensor replacement to more for additional parts or labor.

7. Are there any temporary fixes for OBDII code B0061 (Lincoln) related to the passenger seatbelt tension sensor?

Temporary fixes such as clearing the code with an OBDII scanner may temporarily turn off the warning light, but the underlying issue with the sensor will still need to be addressed.

8. Can OBDII code B0061 (Lincoln) for the passenger seatbelt tension sensor affect vehicle safety inspections?

Yes, having this code present may lead to a failed safety inspection, as it indicates a potential safety issue with the passenger seatbelt system.

9. Is it safe to drive the vehicle with OBDII code B0061 (Lincoln) for the passenger seatbelt tension sensor?

It is not recommended to drive the vehicle with this code present, as it may compromise the safety features associated with the passenger seatbelt and airbag systems.

10. How long does it typically take to repair OBDII code B0061 (Lincoln) for the passenger seatbelt tension sensor?

The repair time can vary depending on the exact cause of the issue and the availability of parts. It may take a few hours to a day for a professional technician to diagnose and repair the problem.