AutoCodes – Ford – B0060 Ford

B0060 Ford Code - Driver Seatbelt Tension Sensor

Quick Answer

The Restraints Control Module (RCM) monitors all deployable device and sensor circuits for a signal cross coupled (short) between circuits. Common causes include Faulty Driver Seatbelt Tension Sensor, Driver Seatbelt Tension Sensor harness is open or shorted, Driver Seatbelt Tension Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0060 Ford indicates Driver Seatbelt Tension Sensor.
Common causes: Common causes include Faulty Driver Seatbelt Tension Sensor, Driver Seatbelt Tension Sensor harness is open or shorted, Driver Seatbelt Tension Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,541

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0060 Ford Description

The Restraints Control Module (RCM) monitors all deployable device and sensor circuits for a signal cross coupled (short) between circuits. If the RCM detects a short between the circuits of one device and another device, it will store a DTC for each of the signal cross coupled faults in memory. The RCM sends a message to the Instrument Panel Cluster (IPC) to illuminate the air bag warning indicator. When a normal loop fault is present (one loop is either shorted to battery/ground, open circuit or low resistance), then signal cross coupled diagnostics will not be active. Once the normal loop fault is repaired, then the signal cross coupled diagnostics will resume.

OBDII Code B0060 Ford - Driver Seatbelt Tension Sensor - AutoCodes.com — B0060 Ford Code - Driver Seatbelt Tension Sensor

What does this mean?

What are the Possible Causes of the DTC B0060 Ford?

Faulty Driver Seatbelt Tension Sensor
Driver Seatbelt Tension Sensor harness is open or shorted
Driver Seatbelt Tension Sensor circuit poor electrical connection

How to Fix the DTC B0060 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0060 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0060 Ford code?

Need more information on how to fix the B0060 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0060 Ford code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0060 Ford Code

1. What are the common symptoms of OBDII code B0060 in a Ford related to the Driver Seatbelt Tension Sensor?

The common symptoms include the airbag warning light staying illuminated on the dashboard and potential issues with the seatbelt pretensioner system.

2. What are the possible causes of OBDII code B0060 (Driver Seatbelt Tension Sensor) in a Ford?

The code B0060 in a Ford is typically triggered by a fault in the driver seatbelt tension sensor, which may be caused by a damaged sensor or a wiring issue.

3. How can I diagnose the OBDII code B0060 for the Driver Seatbelt Tension Sensor in my Ford?

Diagnosing OBDII code B0060 involves using a diagnostic scanner to retrieve the specific fault code, inspecting the seatbelt tension sensor and its wiring for damage, and testing the sensor's functionality.

4. Can I continue driving my Ford with the OBDII code B0060 (Driver Seatbelt Tension Sensor) present?

It is not recommended to drive your Ford with the OBDII code B0060 active, as it indicates a potential safety issue with the seatbelt tension sensor that may affect the proper functioning of the airbag system.

5. How can I repair OBDII code B0060 for the Driver Seatbelt Tension Sensor in my Ford?

Repairing OBDII code B0060 typically involves replacing the faulty driver seatbelt tension sensor or repairing any damaged wiring associated with the sensor.

6. Are there any safety concerns associated with OBDII code B0060 (Driver Seatbelt Tension Sensor) in a Ford?

Yes, OBDII code B0060 indicates a problem with the driver seatbelt tension sensor, which is a critical component of the vehicle's safety system. It is important to address this issue promptly to ensure proper functioning of the airbag system.

7. Can I reset the OBDII code B0060 for the Driver Seatbelt Tension Sensor in my Ford without repairing the issue?

While you can clear the code temporarily, it will likely reappear until the underlying issue with the driver seatbelt tension sensor is properly diagnosed and repaired.

8. How much does it typically cost to repair OBDII code B0060 for the Driver Seatbelt Tension Sensor in a Ford?

The cost of repairing OBDII code B0060 can vary depending on the extent of the damage and whether you choose to repair it yourself or take it to a professional mechanic. Costs may include parts and labor.

9. Are there any preventative measures I can take to avoid triggering OBDII code B0060 in my Ford related to the Driver Seatbelt Tension Sensor?

Regularly inspecting the seatbelt tension sensor and its wiring for damage, and addressing any issues promptly, can help prevent the occurrence of OBDII code B0060 in your Ford.

10. Is it possible to bypass or ignore OBDII code B0060 (Driver Seatbelt Tension Sensor) in my Ford?

It is not recommended to bypass or ignore OBDII code B0060, as it signifies a safety issue with the seatbelt tension sensor that can impact the proper functioning of the airbag system. It is crucial to address this issue for your safety and the safety of others on the road.