AutoCodes – Chevrolet – B0052 2017 Chevrolet Silverado

B0052 2017 Chevrolet Silverado Code - Deployment Commanded

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0052 2017 Chevrolet Silverado indicates Deployment Commanded.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 429

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0052 2017 Chevrolet Silverado Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0052 to set.

OBDII Code B0052 2017 Chevrolet Silverado - Deployment Commanded - AutoCodes.com — B0052 2017 Chevrolet Silverado Code - Deployment Commanded

What does this mean?

What are the Possible Causes of the DTC B0052 2017 Chevrolet Silverado?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B0052 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0052 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0052 2017 Chevrolet Silverado code?

Need more information on how to fix the B0052 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0052 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0052 2017 Chevrolet Silverado Code

1. What does OBDII code B0052 for a 2017 Chevrolet Silverado mean?

The code B0052 indicates that the deployment command has been commanded.

2. What are the common symptoms of OBDII code B0052 in a 2017 Chevrolet Silverado?

Common symptoms may include the airbag warning light staying illuminated on the dashboard and a potential loss of functionality in the airbag system.

3. What are the possible causes of OBDII code B0052 in a 2017 Chevrolet Silverado?

Possible causes may include faulty airbag sensors, issues with the airbag control module, wiring problems, or a malfunction in the deployment command circuit.

4. How can I diagnose OBDII code B0052 in my 2017 Chevrolet Silverado?

Diagnosis typically involves using a OBDII scanner to retrieve the specific fault code, conducting a visual inspection of the airbag system components, and testing the related circuits for continuity and proper voltage.

5. Can I continue driving my 2017 Chevrolet Silverado with OBDII code B0052?

It is not recommended to drive the vehicle with an active airbag fault code, as it can compromise the safety of the airbag system in the event of a collision.

6. How can I repair OBDII code B0052 in my 2017 Chevrolet Silverado?

Repairing the issue may involve replacing faulty sensors, repairing damaged wiring, resetting the airbag control module, or addressing any other specific component that is identified as the root cause of the problem.

7. Is it safe to reset the OBDII code B0052 in my 2017 Chevrolet Silverado without fixing the underlying issue?

Resetting the code without addressing the underlying problem may temporarily turn off the warning light, but it will not fix the issue and the code is likely to reappear.

8. How much does it typically cost to repair OBDII code B0052 in a 2017 Chevrolet Silverado?

The cost of repair can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars, especially if components need to be replaced.

9. Can a DIY enthusiast repair OBDII code B0052 in a 2017 Chevrolet Silverado?

While some basic diagnosis and inspection can be done by a DIY enthusiast, repairing airbag system issues can be complex and dangerous, so it is recommended to seek professional help for such repairs.

10. How often does OBDII code B0052 occur in a 2017 Chevrolet Silverado?

The occurrence of this specific code can vary based on the vehicle's usage and maintenance history, but it is relatively rare compared to more common OBDII codes.