B0049 Code - Third Row Right Frontal Stage 1 Deployment Control
Quick Answer
The Air Bag Sensor Unit (Air Bag Control Module) monitors the Third Row Right Side Airbag. Common causes include Faulty Third Row Right Side Airbag, Third Row Right Side Airbag harness is open or shorted, Third Row Right Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0049 indicates Third Row Right Frontal Stage 1 Deployment Control.
- Common causes
- Common causes include Faulty Third Row Right Side Airbag, Third Row Right Side Airbag harness is open or shorted, Third Row Right Side Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0049 Description
What are the Possible Causes of the DTC B0049?
- Faulty Third Row Right Side Airbag
- Third Row Right Side Airbag harness is open or shorted
- Third Row Right Side Airbag circuit poor electrical connection
How to Fix the DTC B0049?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0049 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0049 code?
Need more information on how to fix the B0049 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0049 code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0049 Code
1. What are the common symptoms of OBDII code B0049 related to Third Row Right Frontal Stage 1 Deployment Control?
- Common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the third-row right frontal airbag.
2. What could cause OBDII code B0049 to trigger for the Third Row Right Frontal Stage 1 Deployment Control?
- The code may be triggered by a fault in the third-row right frontal airbag deployment control system, such as a wiring issue, faulty sensor, or module malfunction.
3. How serious is OBDII code B0049 for the Third Row Right Frontal Stage 1 Deployment Control?
- This code indicates a potential problem with the deployment control of the airbag, which could affect its functionality during a collision. It is crucial to address this issue promptly for safety reasons.
4. Can I continue driving with OBDII code B0049 related to Third Row Right Frontal Stage 1 Deployment Control?
- It is not recommended to drive with this code present, as the affected airbag may not deploy correctly in the event of an accident, compromising your safety and that of passengers.
5. How can I diagnose and repair OBDII code B0049 for Third Row Right Frontal Stage 1 Deployment Control?
- Diagnosing this code typically involves inspecting the wiring, sensors, and control module associated with the third-row right frontal airbag. Repair may involve fixing wiring issues, replacing sensors, or reprogramming the module, as necessary.
6. Will resetting the OBDII code B0049 related to Third Row Right Frontal Stage 1 Deployment Control make it go away permanently?
- Simply resetting the code without addressing the underlying issue will not make it disappear permanently. It is essential to diagnose and repair the root cause to prevent the code from recurring.
7. How much does it cost to fix OBDII code B0049 for the Third Row Right Frontal Stage 1 Deployment Control?
- The cost of fixing this code can vary depending on the specific cause of the issue. It may involve simple repairs like fixing a wiring connection or more complex repairs such as replacing sensors or modules. Professional diagnosis is recommended to determine the exact cost.
8. Can a DIY enthusiast fix OBDII code B0049 associated with Third Row Right Frontal Stage 1 Deployment Control?
- While some aspects of diagnosing and repairing this code may be within reach of experienced DIY enthusiasts, dealing with airbag systems can be complex and dangerous. It is recommended to seek professional help to ensure proper diagnosis and repair.
9. How often does OBDII code B0049 occur in vehicles with Third Row Right Frontal Stage 1 Deployment Control systems?
- The occurrence of this code can vary among vehicles with this specific airbag deployment control system. However, any issues related to airbag deployment should be taken seriously and addressed promptly to ensure safety.
10. Is it necessary to have the Third Row Right Frontal Stage 1 Deployment Control system checked regularly to prevent OBDII code B0049?
- Regular maintenance checks on the airbag system, including the Third Row Right Frontal Stage 1 Deployment Control, can help identify potential issues before they trigger the OBDII code B0049. Preventive maintenance is key to ensuring airbag system functionality and safety.
Discuss the causes and fixes for B0049 OBDII Code
Code B0049 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
