AutoCodes – Saturn – B0040 Saturn

B0040 Saturn Code - Driver Side Deployment Loop Resistance Low

Quick Answer

When ignition switch is turned to RUN position, Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. Common causes include Faulty Driver's Side Air Bag Module, Driver's Side Air Bag Module harness is open or shorted, Driver's Side Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0040 Saturn indicates Driver Side Deployment Loop Resistance Low.
Common causes: Common causes include Faulty Driver's Side Air Bag Module, Driver's Side Air Bag Module harness is open or shorted, Driver's Side Air Bag Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,128

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 10, 2021

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0040 Saturn Description

When ignition switch is turned to RUN position, Sensing and Diagnostic Module (SDM) performs tests to diagnose critical internal malfunctions. SDM then performs deployment loop voltage out of range test and deployment loop resistance measurement test. If voltage out of range test detects a short to voltage condition, resistance measurement test will not be performed.

OBDII Code B0040 Saturn - Driver Side Deployment Loop Resistance Low - AutoCodes.com — B0040 Saturn Code - Driver Side Deployment Loop Resistance Low

What does this mean?

What are the Possible Causes of the DTC B0040 Saturn?

Faulty Driver's Side Air Bag Module
Driver's Side Air Bag Module harness is open or shorted
Driver's Side Air Bag Module circuit poor electrical connection

How to Fix the DTC B0040 Saturn?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0040 Saturn code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0040 Saturn code?

Need more information on how to fix the B0040 Saturn code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0040 Saturn code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0040 Saturn Code

1. What are the common symptoms of OBDII code B0040 in a Saturn, indicating Driver Side Deployment Loop Resistance Low?

The common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver side airbag during a collision.

2. What are the possible causes of OBDII code B0040 in a Saturn?

The code B0040 indicating Driver Side Deployment Loop Resistance Low in a Saturn may be caused by a faulty driver side airbag module, damaged wiring or connectors, or a problem with the airbag deployment loop.

3. How can I diagnose the issue causing OBDII code B0040 in my Saturn?

Diagnosing the issue may require using a professional OBDII scanner to read the specific trouble code. Additionally, a thorough visual inspection of the airbag system components, such as wiring, connectors, and the airbag module, may help identify the root cause.

4. Can I continue driving my Saturn with OBDII code B0040 present?

It is not recommended to drive the vehicle with the OBDII code B0040 indicating Driver Side Deployment Loop Resistance Low, as it may compromise the proper functioning of the driver side airbag in the event of a collision.

5. How can I repair OBDII code B0040 in my Saturn?

Repairing OBDII code B0040 may involve replacing the faulty driver side airbag module, repairing or replacing damaged wiring or connectors, or addressing any issues with the airbag deployment loop as needed.

6. Are there any safety precautions I should take when working on the airbag system to resolve OBDII code B0040?

When working on the airbag system to address OBDII code B0040, it is crucial to disconnect the vehicle's battery and wait for at least 15 minutes to ensure the system is fully de-energized to prevent accidental airbag deployment.

7. Can I reset OBDII code B0040 in my Saturn using a simple DIY method?

Resetting OBDII code B0040 may require using a professional OBDII scanner to clear the code after addressing the underlying issue causing the Driver Side Deployment Loop Resistance Low error.

8. Is it necessary to visit a mechanic to repair OBDII code B0040 in my Saturn?

While some basic troubleshooting and repairs can be done by DIY enthusiasts, it is recommended to consult a qualified mechanic or automotive technician for accurate diagnosis and repair of OBDII code B0040 to ensure the airbag system's safety and functionality.

9. How much can I expect to pay to repair OBDII code B0040 in my Saturn?

The cost of repairing OBDII code B0040 in a Saturn can vary depending on the specific issue causing the error, the required parts, and labor costs. It is advisable to obtain quotes from different mechanics or repair shops for an accurate estimate.

10. How often does OBDII code B0040 indicating Driver Side Deployment Loop Resistance Low occur in Saturn vehicles?

OBDII code B0040 related to Driver Side Deployment Loop Resistance Low may occur infrequently in Saturn vehicles, but it is essential to address it promptly to ensure the proper functioning of the airbag system for driver safety.