AutoCodes – GMC – B0022 2016 GMC Sierra

B0022 2016 GMC Sierra Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0022 2016 GMC Sierra indicates Passenger Seat Belt Retractor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Passenger Seat Belt Retractor Pretensioner, Passenger Seat Belt Retractor Pretensioner harness is open or shorted, Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 486

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0022 2016 GMC Sierra Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B0022 2016 GMC Sierra - Passenger Seat Belt Retractor Pretensioner Deployment Loop - AutoCodes.com — B0022 2016 GMC Sierra Code - Passenger Seat Belt Retractor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0022 2016 GMC Sierra?

Faulty Passenger Seat Belt Retractor Pretensioner
Passenger Seat Belt Retractor Pretensioner harness is open or shorted
Passenger Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0022 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0022:01 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Battery
B0022:02 Passenger Seat Belt Anchor Pretensioner Deployment Loop Short to Ground
B0022:04 Passenger Seat Belt Anchor Pretensioner Deployment Loop Open
B0022:0D Passenger Seat Belt Anchor Pretensioner Deployment Loop High Resistance
B0022:0E Passenger Seat Belt Anchor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0022 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0022 2016 GMC Sierra code?

Need more information on how to fix the B0022 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0022 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0022 2016 GMC Sierra Code

1. What does the OBDII code B0022 for a 2016 GMC Sierra indicate?

The code B0022 in a 2016 GMC Sierra specifically relates to the Passenger Seat Belt Retractor Pretensioner Deployment Loop.

2. What are the common symptoms associated with OBDII code B0022 in a 2016 GMC Sierra?

Common symptoms may include the airbag warning light illuminating on the dashboard and potential issues with the passenger seat belt system.

3. What are the possible causes of OBDII code B0022 in a 2016 GMC Sierra?

Potential causes of the B0022 code could be a faulty seat belt retractor, issues with the pretensioner deployment loop, wiring problems, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B0022 in my 2016 GMC Sierra?

Proper diagnosis typically involves using a scan tool to retrieve the specific fault code, inspecting the seat belt retractor and pretensioner deployment loop, and checking the wiring connections for any issues.

5. Can I continue driving my 2016 GMC Sierra with the OBDII code B0022 present?

It is not recommended to drive the vehicle with the B0022 code active, as it indicates a potential safety issue with the passenger seat belt system and airbag deployment.

6. How can I repair the OBDII code B0022 in my 2016 GMC Sierra?

Repairing the B0022 code may involve replacing a faulty seat belt retractor or pretensioner deployment loop, repairing any damaged wiring, or resetting the airbag control module after fixing the issue.

7. Is it possible to reset the OBDII code B0022 in a 2016 GMC Sierra without repairing the underlying problem?

Resetting the code without addressing the root cause is not recommended, as the issue may persist and potentially compromise the safety functionality of the seat belt and airbag systems.

8. Are there any safety precautions I should take when working on the OBDII code B0022 in my 2016 GMC Sierra?

It is crucial to disconnect the vehicle's battery before working on any airbag-related components to prevent accidental deployment and ensure personal safety.

9. Can a DIY enthusiast with some automotive experience fix the OBDII code B0022 in a 2016 GMC Sierra?

While some repairs related to the B0022 code may be within reach of a DIY enthusiast, it is recommended to consult a professional mechanic or technician for proper diagnosis and repair to ensure safety and accuracy.

10. How much can I expect to pay for repairing the OBDII code B0022 in my 2016 GMC Sierra at a dealership or repair shop?

Costs for repairing the B0022 code can vary depending on the specific issue, but it is advisable to obtain estimates from reputable dealerships or repair shops for an accurate assessment of the repair expenses.