AutoCodes – Chevrolet – B0019 2014 Chevrolet Silverado

B0019 2014 Chevrolet Silverado Code - Passenger Instrument Panel Air Bag Deployment Loop Stage 1

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag or pretensioner. Common causes include Faulty Passenger Instrument Panel Air Bag, Passenger Instrument Panel Air Bag harness is open or shorted, Passenger Instrument Panel Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0019 2014 Chevrolet Silverado indicates Passenger Instrument Panel Air Bag Deployment Loop Stage 1.
Common causes: Common causes include Faulty Passenger Instrument Panel Air Bag, Passenger Instrument Panel Air Bag harness is open or shorted, Passenger Instrument Panel Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 574

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 06, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0019 2014 Chevrolet Silverado Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag or pretensioner. There are 2 shorting bars that will short together control circuits when the connector is disconnected. This will help to prevent unwanted deployment of the air bag or pretensioner during servicing.

OBDII Code B0019 2014 Chevrolet Silverado - Passenger Instrument Panel Air Bag Deployment Loop Stage 1 - AutoCodes.com — B0019 2014 Chevrolet Silverado Code - Passenger Instrument Panel Air Bag Deployment Loop Stage 1

What does this mean?

What are the Possible Causes of the DTC B0019 2014 Chevrolet Silverado?

Faulty Passenger Instrument Panel Air Bag
Passenger Instrument Panel Air Bag harness is open or shorted
Passenger Instrument Panel Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0019 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0019:01 Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Short to Battery
B0019:02 Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Short to Ground
B0019:04 Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Open
B0019:0D Passenger Instrument Panel Air Bag Deployment Loop Stage 1 High Resistance
B0019:0E Passenger Instrument Panel Air Bag Deployment Loop Stage 1 Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0019 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0019 2014 Chevrolet Silverado code?

Need more information on how to fix the B0019 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0019 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0019 2014 Chevrolet Silverado Code

1. What does OBDII code B0019 mean for a 2014 Chevrolet Silverado?

The code B0019 for a 2014 Chevrolet Silverado indicates a problem with the Passenger Instrument Panel Air Bag Deployment Loop Stage 1.

2. What are the common symptoms of OBDII code B0019 in a 2014 Chevrolet Silverado?

Common symptoms of code B0019 in a 2014 Chevrolet Silverado may include the airbag warning light staying illuminated on the dashboard.

3. What are the possible causes of OBDII code B0019 in a 2014 Chevrolet Silverado?

Possible causes of code B0019 in a 2014 Chevrolet Silverado include a faulty passenger instrument panel airbag deployment loop or issues with the airbag system wiring.

4. How can I diagnose OBDII code B0019 in my 2014 Chevrolet Silverado?

Diagnosing code B0019 in a 2014 Chevrolet Silverado typically involves using a diagnostic scanner to retrieve the code and then inspecting the passenger airbag system for any visible damage or loose connections.

5. Can I still drive my 2014 Chevrolet Silverado with OBDII code B0019?

It is not recommended to drive your 2014 Chevrolet Silverado with an active B0019 code, as it indicates a potential issue with the passenger airbag system that may affect its proper deployment in an accident.

6. How can I repair OBDII code B0019 in my 2014 Chevrolet Silverado?

Repairing code B0019 in a 2014 Chevrolet Silverado may involve replacing the faulty passenger instrument panel airbag deployment loop or repairing any damaged wiring in the airbag system.

7. Are there any safety concerns associated with OBDII code B0019 in a 2014 Chevrolet Silverado?

Yes, there are safety concerns associated with code B0019 in a 2014 Chevrolet Silverado, as it indicates a potential problem with the passenger airbag system, which is crucial for occupant safety in the event of a collision.

8. How much does it typically cost to repair OBDII code B0019 in a 2014 Chevrolet Silverado?

The cost to repair code B0019 in a 2014 Chevrolet Silverado can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $200 to $500 or more.

9. Can I reset OBDII code B0019 in my 2014 Chevrolet Silverado without fixing the underlying issue?

While you can clear the code temporarily, it will likely reappear if the root cause of the problem, such as a faulty airbag deployment loop, is not addressed.

10. Is it possible to prevent OBDII code B0019 from appearing in my 2014 Chevrolet Silverado?

Regular maintenance and inspections of the airbag system in your 2014 Chevrolet Silverado can help prevent issues that trigger code B0019, ensuring the system functions properly when needed.