AutoCodesChevrolet – B0018 Chevrolet

B0018 Chevrolet Code - Passenger Frontal Deployment Loop Voltage Out of Range

Quick Answer

The Inflatable Restraint Instrument Panel (I/P) module deployment loop consists of a dual stage I/P module, I/P module high control, and I/P module low control circuits for both stages 1 and 2. Common causes include Faulty Inflatable Restraint Instrument Panel, Inflatable Restraint Instrument Panel harness is open or shorted, Inflatable Restraint Instrument Panel circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B0018 Chevrolet indicates Passenger Frontal Deployment Loop Voltage Out of Range.
Common causes
Common causes include Faulty Inflatable Restraint Instrument Panel, Inflatable Restraint Instrument Panel harness is open or shorted, Inflatable Restraint Instrument Panel circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 9,273
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Oct 05, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0018 Chevrolet Description

The Inflatable Restraint Instrument Panel (I/P) module deployment loop consists of a dual stage I/P module, I/P module high control, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used within the I/P module connector which will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This will help to prevent unwanted deployment of the inflator module during servicing. When the ignition is turned ON, the inflatable restraint Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.
OBDII Code B0018 Chevrolet - Passenger Frontal Deployment Loop Voltage Out of Range - AutoCodes.com
B0018 Chevrolet Code - Passenger Frontal Deployment Loop Voltage Out of Range

What are the Possible Causes of the DTC B0018 Chevrolet?

  • Faulty Inflatable Restraint Instrument Panel
  • Inflatable Restraint Instrument Panel harness is open or shorted
  • Inflatable Restraint Instrument Panel circuit poor electrical connection
  • Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0018 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0018 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0018 Chevrolet code?

Need more information on how to fix the B0018 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0018 Chevrolet code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0018 Chevrolet Code

1. What are the common symptoms of OBDII code B0018 in a Chevrolet vehicle?

- Common symptoms include the airbag warning light staying illuminated on the dashboard and possible non-deployment of the passenger frontal airbag.

2. What does the OBDII code B0018 Chevrolet indicate?

- This code indicates that the passenger frontal deployment loop voltage is out of range, potentially affecting the proper functioning of the airbag system.

3. What are the possible causes of OBDII code B0018 in a Chevrolet?

- Possible causes include faulty wiring connections, damaged wiring harnesses, a malfunctioning passenger airbag module, or issues with the airbag control module.

4. How can I diagnose the cause of OBDII code B0018 in my Chevrolet?

- Diagnosing the issue typically involves inspecting the wiring connections, checking for damaged wires, testing the passenger airbag module, and using a diagnostic scanner to read the code and reset it after repairs.

5. Is it safe to drive with OBDII code B0018 illuminated in a Chevrolet?

- It is not recommended to drive with the airbag warning light on, as it indicates a potential issue with the passenger frontal airbag system, which may not deploy in the event of a collision.

6. Can I reset OBDII code B0018 in my Chevrolet without fixing the underlying issue?

- While you can clear the code with a diagnostic tool, it is crucial to address the root cause of the problem to ensure the proper functioning of the airbag system.

7. How much does it typically cost to repair OBDII code B0018 in a Chevrolet?

- Repair costs can vary depending on the exact cause of the issue, but they may range from a few hundred dollars for wiring repairs to over a thousand dollars if components like the airbag module need replacement.

8. Are there any DIY repair tips for fixing OBDII code B0018 in a Chevrolet?

- DIYers can start by checking wiring connections, inspecting for visible damage, and consulting the vehicle's service manual for guidance on accessing and testing airbag components.

9. Can a mechanic easily fix OBDII code B0018 in a Chevrolet?

- A qualified mechanic with experience in airbag systems can efficiently diagnose and repair the issue, ensuring that the passenger frontal airbag functions correctly and the warning light is reset.

10. How important is it to address OBDII code B0018 promptly in a Chevrolet?

- Promptly addressing this code is crucial for ensuring the safety of vehicle occupants, as the proper functioning of airbag systems is essential in protecting passengers in the event of a collision.

Discuss the causes and fixes for B0018 Chevrolet OBDII Code

Code B0018 Chevrolet comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play