AutoCodes – Generic – B0017

B0017 Code - Passenger Frontal Deployment Loop Open

Quick Answer

The Inflatable Restraint Instrument Panel (I/P) module deployment loop consists of a dual stage I/P module, I/P module high control, and I/P module low control circuits for both stages 1 and 2. Common causes include Faulty Inflatable Restraint Instrument Panel, Inflatable Restraint Instrument Panel harness is open or shorted, Inflatable Restraint Instrument Panel circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0017 indicates Passenger Frontal Deployment Loop Open.
Common causes: Common causes include Faulty Inflatable Restraint Instrument Panel, Inflatable Restraint Instrument Panel harness is open or shorted, Inflatable Restraint Instrument Panel circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,566

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0017 Description

The Inflatable Restraint Instrument Panel (I/P) module deployment loop consists of a dual stage I/P module, I/P module high control, and I/P module low control circuits for both stages 1 and 2. There are 2 shorting bars used within the I/P module connector which will short together the I/P module high and I/P module low control circuits for both stages 1 and 2 when the connector is disconnected. This will help to prevent unwanted deployment of the inflator module during servicing. When the ignition is turned ON, the inflatable restraint Sensing and Diagnostic Module (SDM) performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If a malfunction is detected, a Diagnostic Trouble Code (DTC) will be stored in memory.

OBDII Code B0017 - Passenger Frontal Deployment Loop Open - AutoCodes.com — B0017 Code - Passenger Frontal Deployment Loop Open

What does this mean?

What are the Possible Causes of the DTC B0017?

Faulty Inflatable Restraint Instrument Panel
Inflatable Restraint Instrument Panel harness is open or shorted
Inflatable Restraint Instrument Panel circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0017?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0017 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0017 code?

Need more information on how to fix the B0017 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0017 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B0017 Buick — Passenger Frontal Deployment Loop Open
B0017 Cadillac — Passenger Frontal Deployment Loop Open
B0017 Chevrolet — Passenger Frontal Deployment Loop Open
B0017 GMC — Passenger Frontal Deployment Loop Open
B0017 Pontiac — Passenger Frontal Deployment Loop Open
B0017 Saturn — Passenger Frontal Deployment Loop Open

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0017 Code

1. What does OBDII code B0017 Passenger Frontal Deployment Loop Open mean?

The code B0017 indicates that there is an open circuit in the passenger frontal airbag deployment loop.

2. What are the common symptoms of OBDII code B0017?

Common symptoms of B0017 may include the airbag warning light staying illuminated on the dashboard and a potential loss of functionality of the passenger frontal airbag.

3. What are the possible causes of OBDII code B0017?

Possible causes of B0017 include a faulty passenger frontal airbag module, wiring issues, loose connections, or a blown fuse related to the airbag system.

4. How can I diagnose the cause of OBDII code B0017?

To diagnose B0017, a thorough inspection of the airbag system wiring and connections is necessary. Using a multimeter to check for continuity in the circuit can help pinpoint the issue.

5. Can I drive my vehicle with OBDII code B0017 present?

It is not recommended to drive the vehicle with an unresolved B0017 code, as it indicates a potential issue with the passenger frontal airbag system, which is a crucial safety feature.

6. Is it safe to reset the OBDII code B0017 without addressing the underlying problem?

Resetting the code without fixing the root cause may temporarily turn off the warning light, but it will not resolve the safety issue with the passenger frontal airbag system.

7. How can I repair OBDII code B0017 Passenger Frontal Deployment Loop Open?

Repairing B0017 may involve inspecting and repairing damaged wiring, replacing faulty components such as the airbag module, ensuring all connections are secure, and resetting the system.

8. Can a DIY enthusiast fix OBDII code B0017 at home?

While some aspects of diagnosing and repairing B0017 can be done by a DIY enthusiast with the necessary tools and knowledge, working on airbag systems requires caution and expertise due to safety concerns.

9. How much does it cost to repair OBDII code B0017 at a professional auto repair shop?

The cost of repairing B0017 at a professional auto repair shop can vary depending on the specific issue, parts needed, labor costs, and the shop's rates. It is recommended to get a detailed estimate before proceeding with the repair.

10. Are there any recalls or service bulletins related to OBDII code B0017?

It is advisable to check with the vehicle manufacturer or a qualified dealership to inquire about any recalls or service bulletins related to OBDII code B0017, as some issues may be covered under warranty or special programs.