AutoCodes – GMC – B0015 GMC

B0015 GMC Code - Driver Seat Belt Retractor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0015 GMC indicates Driver Seat Belt Retractor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,716

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0015 GMC Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B0015 GMC - Driver Seat Belt Retractor Pretensioner Deployment Loop - AutoCodes.com — B0015 GMC Code - Driver Seat Belt Retractor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0015 GMC?

Faulty Driver Seat Belt Retractor Pretensioner
Driver Seat Belt Retractor Pretensioner harness is open or shorted
Driver Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0015 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0015:01 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Battery
B0015:02 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
B0015:04 Driver Seat Belt Retractor Pretensioner Deployment Loop Open
B0015:0D Driver Seat Belt Retractor Pretensioner Deployment Loop High Resistance
B0015:0E Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0015 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0015 GMC code?

Need more information on how to fix the B0015 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0015 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

B0015 2014 GMC Sierra — Driver Seat Belt Retractor Pretensioner Deployment Loop
B0015 2015 GMC Sierra — Driver Seat Belt Retractor Pretensioner Deployment Loop
B0015 2016 GMC Sierra — Driver Seat Belt Retractor Pretensioner Deployment Loop
B0015 2017 GMC Sierra — Driver Seat Belt Retractor Pretensioner Deployment Loop
B0015 2018 GMC Sierra — Driver Seat Belt Retractor Pretensioner Deployment Loop

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0015 GMC Code

1. What does the OBDII code B0015 for GMC indicate?

The code B0015 for GMC refers to an issue with the driver seat belt retractor pretensioner deployment loop.

2. What are the common symptoms of OBDII code B0015?

Common symptoms of OBDII code B0015 include the airbag warning light being illuminated on the dashboard and possible issues with the seat belt functionality.

3. What can cause the OBDII code B0015 to trigger?

The OBDII code B0015 can be triggered by a faulty driver seat belt retractor pretensioner deployment loop or issues with the seat belt mechanism.

4. How can I diagnose the OBDII code B0015?

Diagnosing the OBDII code B0015 typically involves using a diagnostic scanner to read the codes and further testing the driver seat belt retractor pretensioner deployment loop for any faults.

5. Is it safe to drive with the OBDII code B0015 present?

It is not recommended to drive with the OBDII code B0015 present as it indicates a potential issue with the driver seat belt retractor pretensioner, which is a crucial safety component.

6. Can I repair the OBDII code B0015 issue myself?

Repairing the OBDII code B0015 issue may require specialized knowledge and tools, so it is recommended to have a professional mechanic address the problem.

7. How much does it typically cost to repair the OBDII code B0015?

The cost of repairing the OBDII code B0015 can vary depending on the exact cause of the issue, but it may involve replacing the driver seat belt retractor pretensioner deployment loop or related components.

8. Are there any preventative measures to avoid the OBDII code B0015 from occurring?

Regular maintenance of the seat belt system and addressing any issues promptly can help prevent the OBDII code B0015 from occurring.

9. Can the OBDII code B0015 affect the overall safety of the vehicle?

Yes, the OBDII code B0015 directly relates to the driver seat belt retractor pretensioner deployment loop, which is a critical safety component in the event of a collision.

10. How long does it typically take to repair the OBDII code B0015 issue?

The repair time for the OBDII code B0015 can vary depending on the exact cause and extent of the problem, but it may take a few hours to complete the necessary repairs.