AutoCodes – Chevrolet – B0015 2016 Chevrolet Silverado

B0015 2016 Chevrolet Silverado Code - Driver Seat Belt Retractor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0015 2016 Chevrolet Silverado indicates Driver Seat Belt Retractor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,182

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0015 2016 Chevrolet Silverado Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B0015 2016 Chevrolet Silverado - Driver Seat Belt Retractor Pretensioner Deployment Loop - AutoCodes.com — B0015 2016 Chevrolet Silverado Code - Driver Seat Belt Retractor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0015 2016 Chevrolet Silverado?

Faulty Driver Seat Belt Retractor Pretensioner
Driver Seat Belt Retractor Pretensioner harness is open or shorted
Driver Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0015 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0015:01 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Battery
B0015:02 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
B0015:04 Driver Seat Belt Retractor Pretensioner Deployment Loop Open
B0015:0D Driver Seat Belt Retractor Pretensioner Deployment Loop High Resistance
B0015:0E Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0015 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0015 2016 Chevrolet Silverado code?

Need more information on how to fix the B0015 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0015 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0015 2016 Chevrolet Silverado Code

1. What does OBDII code B0015 for a 2016 Chevrolet Silverado indicate?

The B0015 code specifically relates to the Driver Seat Belt Retractor Pretensioner Deployment Loop.

2. What are the common symptoms of OBDII code B0015 in a 2016 Chevrolet Silverado?

Common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the driver seat belt retractor.

3. What could cause the OBDII code B0015 to trigger in a 2016 Chevrolet Silverado?

Potential causes of the B0015 code include a faulty seat belt pretensioner, damaged wiring in the seat belt system, or a problem with the airbag control module.

4. How can I diagnose the OBDII code B0015 in my 2016 Chevrolet Silverado?

Diagnosing the B0015 code typically involves using an OBDII scanner to retrieve the specific fault codes and then inspecting the seat belt system components for any visible damage.

5. Is it safe to drive my 2016 Chevrolet Silverado with the OBDII code B0015 present?

It is recommended to address the B0015 code promptly to ensure the proper functioning of the seat belt pretensioner system in the event of a collision.

6. Can I reset the OBDII code B0015 in my 2016 Chevrolet Silverado by disconnecting the battery?

While disconnecting the battery may temporarily clear the code, it is essential to investigate and repair the underlying issue to prevent the code from reoccurring.

7. How much does it typically cost to repair the OBDII code B0015 in a 2016 Chevrolet Silverado?

The cost of repairing the B0015 code can vary depending on the specific cause, but it may involve replacing the seat belt pretensioner or repairing the wiring, which could range from moderate to expensive.

8. Can I fix the OBDII code B0015 in my 2016 Chevrolet Silverado myself?

While some DIY enthusiasts may attempt to address the B0015 code themselves, it is recommended to seek professional assistance for proper diagnosis and repair to ensure safety and effectiveness.

9. Will the OBDII code B0015 affect the overall safety of my 2016 Chevrolet Silverado?

The B0015 code directly relates to the driver's seat belt pretensioner system, so it can impact the effectiveness of the seat belt in the event of a collision, making it crucial to address promptly.

10. How long does it usually take to repair the OBDII code B0015 in a 2016 Chevrolet Silverado?

The repair time for the B0015 code can vary based on the specific issue, but it may take a few hours to a day, depending on the complexity of the repair needed.