AutoCodes – GMC – B0015 2015 GMC Sierra

B0015 2015 GMC Sierra Code - Driver Seat Belt Retractor Pretensioner Deployment Loop

Quick Answer

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0015 2015 GMC Sierra indicates Driver Seat Belt Retractor Pretensioner Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Belt Retractor Pretensioner, Driver Seat Belt Retractor Pretensioner harness is open or shorted, Driver Seat Belt Retractor Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 594

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0015 2015 GMC Sierra Description

The seat belt pretensioner (driver and passenger) consists of a housing, seat belt retractor (located in the B-pillar), seat belt anchor (located in the seat), seat belt webbing, an initiator, and a canister of gas-generating materials. The initiator is part of the seat belt pretensioner deployment loop. When the vehicle is involved in a collision of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) causes current to flow through the seat belt deployment loops to the initiator. Current passing through the initiator ignites the material in the canister producing a rapid generation of gas. The gas produced from this reaction deploys the seat belt pretensioners which removes all of the slack in the seat belts. Depending on the severity of the collision, the seat belt pretensioners may deploy without the frontal air bags deploying, or they will deploy immediately before the frontal air bags deploy. A shorting bar (if equipped) is located in the connector.

OBDII Code B0015 2015 GMC Sierra - Driver Seat Belt Retractor Pretensioner Deployment Loop - AutoCodes.com — B0015 2015 GMC Sierra Code - Driver Seat Belt Retractor Pretensioner Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0015 2015 GMC Sierra?

Faulty Driver Seat Belt Retractor Pretensioner
Driver Seat Belt Retractor Pretensioner harness is open or shorted
Driver Seat Belt Retractor Pretensioner circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0015 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0015:01 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Battery
B0015:02 Driver Seat Belt Retractor Pretensioner Deployment Loop Short to Ground
B0015:04 Driver Seat Belt Retractor Pretensioner Deployment Loop Open
B0015:0D Driver Seat Belt Retractor Pretensioner Deployment Loop High Resistance
B0015:0E Driver Seat Belt Retractor Pretensioner Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0015 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0015 2015 GMC Sierra code?

Need more information on how to fix the B0015 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0015 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0015 2015 GMC Sierra Code

1. What does OBDII code B0015 for a 2015 GMC Sierra indicate?

This code refers to a fault in the driver seat belt retractor pretensioner deployment loop.

2. What are the common symptoms of OBDII code B0015 in a 2015 GMC Sierra?

Common symptoms include the airbag warning light illuminating on the dashboard and potential issues with the driver seat belt system.

3. What can cause OBDII code B0015 to trigger in a 2015 GMC Sierra?

Potential causes include a faulty seat belt retractor, damaged deployment loop, wiring issues, or a problem with the airbag control module.

4. How can I diagnose the cause of OBDII code B0015 in my 2015 GMC Sierra?

Diagnosis typically involves using a scan tool to retrieve the specific fault code, inspecting the seat belt retractor and deployment loop for damage, and checking the wiring connections for any issues.

5. Is it safe to drive my 2015 GMC Sierra with OBDII code B0015 present?

It is recommended to address this issue promptly to ensure the proper functioning of the driver seat belt system and airbag deployment in case of an accident.

6. Can I reset OBDII code B0015 in my 2015 GMC Sierra without fixing the underlying issue?

Resetting the code without addressing the underlying problem will likely result in the code reappearing once the system detects the fault again.

7. How can I repair OBDII code B0015 in my 2015 GMC Sierra?

Repair options may include replacing the driver seat belt retractor, repairing the deployment loop, fixing any wiring issues, or replacing the airbag control module if necessary.

8. Should I attempt to fix OBDII code B0015 in my 2015 GMC Sierra myself?

While some basic troubleshooting like checking connections can be done by DIY enthusiasts, more complex repairs involving airbag systems should be performed by qualified professionals.

9. How much does it typically cost to fix OBDII code B0015 in a 2015 GMC Sierra?

The cost of repair can vary depending on the specific issue, parts needed, and labor costs. It is advisable to get a diagnosis from a mechanic to determine the exact cost.

10. Can OBDII code B0015 in a 2015 GMC Sierra affect the vehicle's overall safety?

Yes, this code relates to the driver seat belt system and airbag deployment, so addressing it promptly is crucial for maintaining the safety features of the vehicle.