AutoCodes – Saturn – B0014 Saturn

B0014 Saturn Code - Driver Seat Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0014 Saturn indicates Driver Seat Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,645

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014 Saturn Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set.

OBDII Code B0014 Saturn - Driver Seat Side Air Bag Deployment Loop - AutoCodes.com — B0014 Saturn Code - Driver Seat Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0014 Saturn?

Faulty Driver Seat Side Air Bag
Driver Seat Side Air Bag harness is open or shorted
Driver Seat Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014 Saturn?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0014:01 Driver Seat Side Air Bag Deployment Loop Short to Battery
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014 Saturn code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014 Saturn code?

Need more information on how to fix the B0014 Saturn code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014 Saturn code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014 Saturn Code

1. What are the common symptoms of OBDII code B0014 in a Saturn related to the driver seat side airbag deployment loop?

- The most common symptom is the illumination of the airbag warning light on the dashboard.

2. What are the possible causes of OBDII code B0014 indicating an issue with the driver seat side airbag deployment loop in a Saturn?

- The code may be triggered by a fault in the wiring harness, a loose connection, or a malfunctioning component within the airbag system.

3. How can I diagnose the issue related to OBDII code B0014 in my Saturn's driver seat side airbag deployment loop?

- A proper diagnosis requires a professional OBDII scanner to read and interpret the error code, followed by a thorough inspection of the airbag system components.

4. Can I still drive my Saturn with the OBDII code B0014 present in the driver seat side airbag deployment loop?

- It is not recommended to drive the vehicle with an active airbag fault code, as the driver seat side airbag may not deploy in the event of a collision.

5. What are some repair tips for addressing OBDII code B0014 in a Saturn's airbag system?

- Common repair options include checking and repairing any damaged wiring, securing loose connections, or replacing faulty airbag system components as needed.

6. Is it safe to attempt to reset the OBDII code B0014 related to the driver seat side airbag deployment loop in a Saturn on my own?

- It is not advisable to reset the code without addressing the underlying issue, as it may compromise the safety of the airbag system.

7. How much does it typically cost to repair OBDII code B0014 in a Saturn's driver seat side airbag deployment loop?

- The cost of repair can vary depending on the specific issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.

8. Can OBDII code B0014 in a Saturn's airbag system be caused by a DIY repair or modification?

- Yes, improper DIY repairs or modifications to the airbag system can potentially trigger the B0014 code and should be avoided.

9. Are there any recalls or technical service bulletins related to OBDII code B0014 in Saturn vehicles?

- It is recommended to check with the manufacturer or authorized dealerships for any recalls or technical service bulletins that may address the B0014 code in Saturn vehicles.

10. How can I prevent OBDII code B0014 from recurring in my Saturn's airbag system after repair?

- To prevent the code from coming back, it is essential to ensure that all repairs are done correctly, all connections are secure, and the airbag system is functioning properly before resetting the code.