B0014 Pontiac Code - Driver Seat Side Air Bag Deployment Loop
Quick Answer
During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0014 Pontiac indicates Driver Seat Side Air Bag Deployment Loop.
- Common causes
- Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0014 Pontiac Description
What are the Possible Causes of the DTC B0014 Pontiac?
- Faulty Driver Seat Side Air Bag
- Driver Seat Side Air Bag harness is open or shorted
- Driver Seat Side Air Bag circuit poor electrical connection
- Faulty Sensing and Diagnostic Module (SDM)
How to Fix the DTC B0014 Pontiac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0014 Pontiac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0014 Pontiac code?
Need more information on how to fix the B0014 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0014 Pontiac code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0014 Pontiac Code
1. What are common symptoms of OBDII code B0014 in a Pontiac related to the driver seat side airbag deployment loop?
The most common symptoms include the airbag warning light illuminating on the dashboard and a potential message indicating an issue with the driver seat side airbag system.
2. What are the possible causes of OBDII code B0014 in a Pontiac?
The code B0014 in a Pontiac is typically triggered by a fault in the driver seat side airbag deployment loop, which could be due to a damaged wiring harness, faulty airbag module, or a poor connection.
3. How can I diagnose the OBDII code B0014 in my Pontiac?
To diagnose code B0014, a professional diagnostic tool capable of reading airbag system codes is needed. The system should be inspected for any visible damage to the wiring, connectors, or components.
4. Can I drive my Pontiac with OBDII code B0014 present?
It is not recommended to drive your Pontiac with an active B0014 code, as it indicates a potential issue with the driver seat side airbag system, which may not deploy properly in the event of a collision.
5. How can I repair OBDII code B0014 in my Pontiac?
Repairing code B0014 involves identifying and addressing the root cause of the issue. This may include repairing or replacing damaged wiring, connectors, or components in the driver seat side airbag deployment loop.
6. Is it safe to reset the OBDII code B0014 in my Pontiac without fixing the underlying issue?
Resetting the code without fixing the underlying problem is not recommended, as it may lead to the airbag system failing to deploy in an emergency situation. It is crucial to address the root cause of the code before resetting it.
7. Are there any safety precautions to consider when working on the driver seat side airbag system in my Pontiac?
When working on the airbag system, it is essential to disconnect the vehicle's battery and allow sufficient time for the system to discharge to prevent accidental deployment. It is also recommended to wear appropriate safety gear.
8. Can a DIY enthusiast repair OBDII code B0014 in a Pontiac, or is it best left to professionals?
Repairing code B0014 may require specialized knowledge and tools, so it is generally recommended to leave this task to experienced professionals who are trained in handling airbag systems to ensure proper diagnosis and repair.
9. How much does it typically cost to repair OBDII code B0014 in a Pontiac?
The cost of repairing code B0014 can vary depending on the root cause of the issue and the extent of the repair needed. It is advisable to consult with a trusted mechanic or dealership for an accurate cost estimate.
10. Can OBDII code B0014 in a Pontiac affect the overall safety of the vehicle?
Yes, code B0014 directly relates to the driver seat side airbag system, and if left unresolved, it can compromise the safety of the vehicle occupants in the event of a collision by preventing the airbag from deploying properly.
Discuss the causes and fixes for B0014 Pontiac OBDII Code
Code B0014 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.