AutoCodes – GMC – B0014 2017 GMC Sierra

B0014 2017 GMC Sierra Code - Driver Seat Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0014 2017 GMC Sierra indicates Driver Seat Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 416

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014 2017 GMC Sierra Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set.

OBDII Code B0014 2017 GMC Sierra - Driver Seat Side Air Bag Deployment Loop - AutoCodes.com — B0014 2017 GMC Sierra Code - Driver Seat Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0014 2017 GMC Sierra?

Faulty Driver Seat Side Air Bag
Driver Seat Side Air Bag harness is open or shorted
Driver Seat Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0014:01 Driver Seat Side Air Bag Deployment Loop Short to Battery
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014 2017 GMC Sierra code?

Need more information on how to fix the B0014 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014 2017 GMC Sierra Code

1. What does OBDII code B0014 for a 2017 GMC Sierra mean?

This code indicates an issue with the Driver Seat Side Air Bag Deployment Loop.

2. What are the common symptoms of OBDII code B0014 in a 2017 GMC Sierra?

Common symptoms include the airbag warning light on the dashboard remaining illuminated and potential non-deployment of the driver seat side airbag during an accident.

3. What are some possible causes of OBDII code B0014 in a 2017 GMC Sierra?

Potential causes include a faulty driver seat side airbag deployment loop, damaged wiring or connectors, or a problem with the airbag control module.

4. How can I diagnose the issue related to OBDII code B0014 in my 2017 GMC Sierra?

Diagnosing the problem may require using a professional OBDII scanner to retrieve the specific error codes and conducting a thorough inspection of the driver seat side airbag system.

5. Can I continue driving my 2017 GMC Sierra with OBDII code B0014 present?

It is not recommended to drive the vehicle with a known airbag issue, as it may compromise safety in the event of an accident. Prompt attention and repair are advised.

6. What are the repair options for fixing OBDII code B0014 in a 2017 GMC Sierra?

Repair options may include replacing the faulty driver seat side airbag deployment loop, repairing damaged wiring or connectors, or resetting the airbag control module after addressing the underlying issue.

7. Is it safe to attempt DIY repairs for OBDII code B0014 in a 2017 GMC Sierra?

Due to the safety implications of airbag systems, it is recommended to have repairs related to OBDII code B0014 performed by a qualified technician with experience in handling airbag systems.

8. How much does it typically cost to repair OBDII code B0014 in a 2017 GMC Sierra?

Repair costs can vary depending on the specific underlying issue, parts required, and labor rates. It is advisable to obtain a diagnosis and repair estimate from a reputable auto repair shop.

9. Are there any recalls or service bulletins related to OBDII code B0014 in a 2017 GMC Sierra?

It is recommended to check with a GMC dealership or the National Highway Traffic Safety Administration (NHTSA) website for any related recalls or service bulletins concerning this OBDII code.

10. How important is it to address OBDII code B0014 promptly in a 2017 GMC Sierra?

Prompt attention to OBDII code B0014 is crucial, as it directly affects the proper functioning of the driver seat side airbag system, which is a critical safety feature in the event of a collision.