AutoCodes – Chevrolet – B0014 2014 Chevrolet Silverado

B0014 2014 Chevrolet Silverado Code - Driver Seat Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0014 2014 Chevrolet Silverado indicates Driver Seat Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 960

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014 2014 Chevrolet Silverado Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set.

OBDII Code B0014 2014 Chevrolet Silverado - Driver Seat Side Air Bag Deployment Loop - AutoCodes.com — B0014 2014 Chevrolet Silverado Code - Driver Seat Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0014 2014 Chevrolet Silverado?

Faulty Driver Seat Side Air Bag
Driver Seat Side Air Bag harness is open or shorted
Driver Seat Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0014:01 Driver Seat Side Air Bag Deployment Loop Short to Battery
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014 2014 Chevrolet Silverado code?

Need more information on how to fix the B0014 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014 2014 Chevrolet Silverado Code

1. What does OBDII code B0014 mean for a 2014 Chevrolet Silverado?

The B0014 code indicates a problem with the driver seat side air bag deployment loop.

2. What are the common symptoms of OBDII code B0014 in a 2014 Chevrolet Silverado?

Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver seat side airbag during a collision.

3. What are possible causes of OBDII code B0014 in a 2014 Chevrolet Silverado?

Potential causes of the B0014 code include a faulty driver seat side airbag, damaged wiring or connectors in the deployment loop, or issues with the airbag control module.

4. How can I diagnose the OBDII code B0014 in my 2014 Chevrolet Silverado?

Diagnosing the B0014 code typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the wiring and connectors in the driver seat side airbag system, and testing the airbag components for proper functionality.

5. Can I still drive my 2014 Chevrolet Silverado with the OBDII code B0014 present?

It is not recommended to drive the vehicle with an active airbag fault code, as it can compromise the safety of the driver in the event of a collision. It is advisable to address the issue promptly.

6. How can I repair OBDII code B0014 in my 2014 Chevrolet Silverado?

Repairing the B0014 code may involve replacing the driver seat side airbag, repairing or replacing damaged wiring or connectors, or resetting the airbag control module after the issue has been resolved.

7. Are there any safety concerns associated with OBDII code B0014 in a 2014 Chevrolet Silverado?

Yes, the B0014 code pertains to the driver seat side airbag, which is crucial for occupant protection in the event of a side impact collision. It is important to address this issue promptly to ensure the airbag functions as intended.

8. Can I reset the OBDII code B0014 in my 2014 Chevrolet Silverado using a diagnostic tool?

Resetting the B0014 code using a diagnostic tool is possible after the underlying issue has been repaired. However, simply clearing the code without addressing the root cause will likely result in the code reappearing.

9. How much does it typically cost to repair OBDII code B0014 in a 2014 Chevrolet Silverado?

The cost of repairing the B0014 code can vary depending on the specific issue causing the fault. Replacing the driver seat side airbag or repairing wiring may incur different costs, so it is advisable to consult a professional for an accurate estimate.

10. Is it possible to prevent OBDII code B0014 from occurring in my 2014 Chevrolet Silverado?

Regular maintenance and inspections of the airbag system in your Chevrolet Silverado can help prevent issues like the B0014 code. Additionally, avoiding physical damage to the airbag components can also contribute to preventing this fault code.