AutoCodes – Generic – B0014

B0014 Code - Driver Seat Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0014 indicates Driver Seat Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Side Air Bag, Driver Seat Side Air Bag harness is open or shorted, Driver Seat Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,380

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0014 Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnected. The shorting bar helps prevent unwanted deployment of the inflator module during servicing. The SDM performs a continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test are below specifications the code B0014 and the appropriate symptom byte will be set.

OBDII Code B0014 - Driver Seat Side Air Bag Deployment Loop - AutoCodes.com — B0014 Code - Driver Seat Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B0014?

Faulty Driver Seat Side Air Bag
Driver Seat Side Air Bag harness is open or shorted
Driver Seat Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0014?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0014:01 Driver Seat Side Air Bag Deployment Loop Short to Battery
B0014:02 Driver Seat Side Air Bag Deployment Loop Short to Ground
B0014:04 Driver Seat Side Air Bag Deployment Loop Open
B0014:0D Driver Seat Side Air Bag Deployment Loop High Resistance
B0014:0E Driver Seat Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0014 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0014 code?

Need more information on how to fix the B0014 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0014 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B0014 Buick — Driver Seat Side Air Bag Deployment Loop
B0014 Cadillac — Driver Seat Side Air Bag Deployment Loop
B0014 Chevrolet — Driver Seat Side Air Bag Deployment Loop
B0014 GMC — Driver Seat Side Air Bag Deployment Loop
B0014 Pontiac — Driver Seat Side Air Bag Deployment Loop
B0014 Saturn — Driver Seat Side Air Bag Deployment Loop

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0014 Code

1. What are the common symptoms of OBDII code B0014 related to the driver seat side airbag deployment loop?

- The common symptoms include the airbag warning light on the dashboard staying illuminated, indicating a potential issue with the driver seat side airbag system.

2. What are some possible causes of OBDII code B0014?

- Possible causes of code B0014 can include a faulty driver seat side airbag deployment loop, damaged wiring in the airbag system, or a malfunctioning airbag control module.

3. How serious is OBDII code B0014, and is it safe to drive with this code active?

- Code B0014 indicates a problem with the driver seat side airbag system, so it is essential to address the issue promptly. It is not safe to drive with a potential airbag malfunction as it may compromise occupant safety in the event of a collision.

4. Can OBDII code B0014 be reset, or does it require professional diagnosis and repair?

- While the code can be cleared with an OBDII scanner, it is crucial to have a professional diagnose and repair the underlying cause to ensure the airbag system's proper function.

5. Are there any DIY repair tips for addressing OBDII code B0014?

- DIY repair for code B0014 may involve checking the wiring connections in the driver seat side airbag system for any visible damage or loose connections. However, more complex repairs may require professional assistance.

6. How can I prevent OBDII code B0014 from recurring after repair?

- To prevent code B0014 from recurring, ensure that all components of the driver seat side airbag system are properly installed, wiring connections are secure, and the airbag control module is functioning correctly.

7. How much does it typically cost to repair OBDII code B0014 related to the driver seat side airbag deployment loop?

- The cost of repairing code B0014 can vary depending on the underlying cause of the issue. It is recommended to consult with a professional mechanic to get an accurate estimate for the repair.

8. Can code B0014 affect other airbag systems in the vehicle, or is it isolated to the driver seat side airbag?

- Code B0014 typically relates to the driver seat side airbag deployment loop and may not directly affect other airbag systems in the vehicle. However, it is essential to address the issue promptly to ensure overall airbag system functionality.

9. Is it possible to drive the vehicle without fixing OBDII code B0014, or should the repair be prioritized?

- It is not advisable to drive the vehicle with an active code B0014, as it indicates a potential safety issue with the driver seat side airbag system. Prioritize repairing the problem to ensure occupant safety.

10. How long does it typically take to repair OBDII code B0014 related to the driver seat side airbag deployment loop?

- The repair time for code B0014 can vary depending on the exact cause of the issue and the complexity of the repair. It is recommended to consult with a professional mechanic for an estimated repair timeline.