AutoCodes – Saturn – B0013 Saturn

B0013 Saturn Code - Driver Frontal Deployment Loop Stage 2

Quick Answer

During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0013 Saturn indicates Driver Frontal Deployment Loop Stage 2.
Common causes: Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,431

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0013 Saturn Description

During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. There are two shorting bars used within the steering wheel air bag coil connector which will short together both steering wheel air bag stage 1 high control circuit and steering wheel air bag stage 1 low control circuit and both steering wheel air bag stage 2 high control circuit and steering wheel air bag stage 2 low control circuit when the connector is disconnected. This will help to prevent unwanted deployment of the steering wheel air bag during servicing.

OBDII Code B0013 Saturn - Driver Frontal Deployment Loop Stage 2 - AutoCodes.com — B0013 Saturn Code - Driver Frontal Deployment Loop Stage 2

What does this mean?

What are the Possible Causes of the DTC B0013 Saturn?

Faulty Steering Wheel Air Bag
Faulty Steering Wheel Air Bag Coil
Steering Wheel Air Bag harness is open or shorted
Steering Wheel Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0013 Saturn?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0013:01 Driver Frontal Deployment Loop Stage 2 Short to Battery
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0013 Saturn code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0013 Saturn code?

Need more information on how to fix the B0013 Saturn code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0013 Saturn code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0013 Saturn Code

1. What are common symptoms of OBDII code B0013 in a Saturn related to Driver Frontal Deployment Loop Stage 2?

- Common symptoms may include the airbag warning light illuminating on the dashboard, along with potential non-deployment of the driver's frontal airbag during a collision.

2. What are possible causes of OBDII code B0013 in a Saturn?

- The code B0013 can be triggered by issues such as a faulty driver frontal airbag, a damaged airbag module, a disconnected connector in the airbag system, or a problem with the wiring harness.

3. How can I diagnose the cause of OBDII code B0013 in my Saturn?

- To diagnose the issue, a professional technician can use an OBDII scanner to retrieve the specific fault code and perform further testing on the driver frontal airbag system components to pinpoint the exact cause.

4. Is it safe to drive my Saturn with OBDII code B0013 triggered?

- It is not recommended to drive the vehicle with the B0013 code active, as it indicates a potential problem with the driver frontal airbag system, which can compromise safety in the event of a collision.

5. Can I reset the OBDII code B0013 in my Saturn without fixing the underlying issue?

- While you can clear the code temporarily with an OBDII scanner, it will likely reappear until the root cause of the problem is identified and repaired.

6. How can I repair OBDII code B0013 in a Saturn related to Driver Frontal Deployment Loop Stage 2?

- Repairing this code may involve inspecting and repairing/replacing the driver frontal airbag, checking and fixing any damaged wiring or connectors, or replacing the airbag module if necessary.

7. Are there any safety precautions to consider when working on OBDII code B0013 in a Saturn?

- It is crucial to disconnect the vehicle's battery and wait for the airbag system to fully discharge before working on any components related to the airbag system to prevent accidental deployment.

8. Can a DIY enthusiast fix OBDII code B0013 in a Saturn at home?

- While some basic troubleshooting steps can be attempted by DIY enthusiasts, dealing with airbag systems requires specialized knowledge and tools, so it is recommended to consult a professional technician for proper diagnosis and repair.

9. How much does it typically cost to repair OBDII code B0013 in a Saturn?

- The cost of repairing the B0013 code can vary depending on the specific cause of the issue, but it may involve expenses for parts replacement, diagnostic testing, and labor, which can range from a few hundred to over a thousand dollars.

10. How long does it take to fix OBDII code B0013 in a Saturn?

- The repair time for the B0013 code can vary based on the complexity of the issue and the availability of parts, but it may take a few hours to a full day for a professional technician to diagnose and repair the problem effectively.