AutoCodes – Buick – B0013 Buick

B0013 Buick Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2

Quick Answer

During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0013 Buick indicates Driver Steering Wheel Air Bag Deployment Loop Stage 2.
Common causes: Common causes include Faulty Steering Wheel Air Bag, Faulty Steering Wheel Air Bag Coil, Steering Wheel Air Bag harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,248

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 09, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0013 Buick Description

During a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy the steering wheel air bag. The SDM performs continuous diagnostic tests on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. There are two shorting bars used within the steering wheel air bag coil connector which will short together both steering wheel air bag stage 1 high control circuit and steering wheel air bag stage 1 low control circuit and both steering wheel air bag stage 2 high control circuit and steering wheel air bag stage 2 low control circuit when the connector is disconnected. This will help to prevent unwanted deployment of the steering wheel air bag during servicing.

OBDII Code B0013 Buick - Driver Steering Wheel Air Bag Deployment Loop Stage 2 - AutoCodes.com — B0013 Buick Code - Driver Steering Wheel Air Bag Deployment Loop Stage 2

What does this mean?

What are the Possible Causes of the DTC B0013 Buick?

Faulty Steering Wheel Air Bag
Faulty Steering Wheel Air Bag Coil
Steering Wheel Air Bag harness is open or shorted
Steering Wheel Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B0013 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0013:01 Driver Frontal Deployment Loop Stage 2 Short to Battery
B0013:02 Driver Frontal Deployment Loop Stage 2 Short to Ground
B0013:04 Driver Frontal Deployment Loop Stage 2 Open Circuit
B0013:0D Driver Frontal Deployment Loop Stage 2 High Resistance
B0013:0E Driver Frontal Deployment Loop Stage 2 Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0013 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0013 Buick code?

Need more information on how to fix the B0013 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0013 Buick code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0013 Buick Code

1. What are common symptoms of OBDII code B0013 in a Buick related to the Driver Steering Wheel Air Bag Deployment Loop Stage 2?

- Common symptoms include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the steering wheel airbag system.

2. What are possible causes of OBDII code B0013 in a Buick?

- Possible causes include a faulty driver steering wheel airbag deployment loop, damaged wiring connections, or a malfunctioning airbag control module.

3. How can I diagnose the OBDII code B0013 in my Buick?

- Diagnosis typically involves using an OBDII scanner to retrieve the specific error code, followed by inspecting the driver steering wheel airbag system components for any visible damage or loose connections.

4. Is it safe to drive my Buick with OBDII code B0013 present?

- It is recommended to address the issue promptly as driving with a malfunctioning airbag system can compromise safety in the event of a collision.

5. Can I reset the OBDII code B0013 in my Buick myself?

- While you can clear the error code with an OBDII scanner, it is crucial to identify and fix the underlying issue causing the code to prevent it from reoccurring.

6. What are some DIY repair tips for fixing OBDII code B0013 in a Buick?

- DIY repair tips may include checking and securing wiring connections, inspecting the airbag deployment loop for damage, or replacing the faulty components as needed.

7. Should I attempt to repair the OBDII code B0013 in my Buick myself?

- Repairing airbag-related issues can be complex and dangerous if not done correctly. It is recommended to seek professional help to ensure the airbag system is repaired properly and safely.

8. How much does it typically cost to repair OBDII code B0013 in a Buick?

- The cost of repair can vary depending on the extent of the issue and the specific components that need to be replaced. It is advisable to obtain quotes from reputable mechanics or dealerships.

9. Can OBDII code B0013 be triggered by a minor issue in a Buick?

- While some cases may be caused by minor issues like loose connections, it is essential to address the problem promptly to ensure the airbag system functions correctly in an emergency.

10. How long does it take to repair OBDII code B0013 in a Buick?

- The repair time can vary based on the exact cause of the issue and the availability of replacement parts. Simple fixes may take a few hours, while more complex repairs could require additional time.