B0011 Honda Code - Decreased Resistance In The Passenger Airbag Second Inflator
Quick Answer
The Driver Side Airbag is located in the center of the steering wheel. Common causes include Faulty Passenger Side Airbag, Passenger Side Airbag harness is open or shorted, Passenger Side Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0011 Honda indicates Decreased Resistance In The Passenger Airbag Second Inflator.
- Common causes
- Common causes include Faulty Passenger Side Airbag, Passenger Side Airbag harness is open or shorted, Passenger Side Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0011 Honda Description
What are the Possible Causes of the DTC B0011 Honda?
- Faulty Passenger Side Airbag
- Passenger Side Airbag harness is open or shorted
- Passenger Side Airbag circuit poor electrical connection
How to Fix the DTC B0011 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0011:11 Short To Ground In The Passenger Side Airbag Second Inflator
B0011:12 Short To Power In The Passenger Side Airbag Second Inflator
B0011:13 Open Or Increased Resistance In The Passenger Side Airbag Second Inflator
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0011 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0011 Honda code?
Need more information on how to fix the B0011 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0011 Honda code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0011 Honda Code
1. What are the common symptoms of OBDII code B0011 in a Honda?
The common symptoms include the airbag warning light illuminating on the dashboard and a diagnostic trouble code B0011 stored in the vehicle's computer.
2. What does the OBDII code B0011 for decreased resistance in the passenger airbag second inflator mean in a Honda?
This code indicates that there is an issue with the passenger airbag second inflator due to decreased resistance in the circuit.
3. What are the potential causes of OBDII code B0011 in a Honda?
Possible causes include a faulty passenger airbag second inflator, wiring issues in the circuit, or a problem with the airbag control module.
4. How can I diagnose the OBDII code B0011 in my Honda?
Diagnosing this code typically involves using a scan tool to retrieve the specific trouble code, inspecting the wiring and connectors related to the passenger airbag system, and testing the resistance in the circuit.
5. Can I still drive my Honda with the OBDII code B0011 present?
It is not recommended to drive the vehicle with this code active, as it indicates a potential issue with the passenger airbag system, which is crucial for occupant safety in the event of a collision.
6. How can I repair OBDII code B0011 in my Honda?
Repairing this code may involve replacing the faulty passenger airbag second inflator, repairing any damaged wiring or connectors, or resetting the airbag control module after the issue has been resolved.
7. Is it safe to attempt to repair OBDII code B0011 in a Honda on my own?
Due to the critical nature of the passenger airbag system, it is recommended to have this issue diagnosed and repaired by a qualified automotive technician to ensure the safety systems are functioning correctly.
8. How much does it typically cost to repair OBDII code B0011 in a Honda?
The cost of repairing this code can vary depending on the specific cause of the issue, but it may involve parts and labor expenses ranging from a few hundred to a few thousand dollars.
9. Can resetting the OBDII code B0011 in my Honda resolve the issue?
Resetting the code may temporarily turn off the warning light, but it will not fix the underlying problem causing the decreased resistance in the passenger airbag second inflator.
10. Will OBDII code B0011 cause the airbags to deploy unexpectedly in my Honda?
While it is unlikely that this specific code will cause the airbags to deploy unexpectedly, it is essential to address the issue promptly to ensure the proper functioning of the passenger airbag system.
Discuss the causes and fixes for B0011 Honda OBDII Code
Code B0011 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
