AutoCodes – Ford – B0011 Ford

B0011 Ford Code - Passenger Frontal Stage 2 Deployment Control

Quick Answer

The Restraints Control Module (RCM) monitors all deployable device and sensor circuits for a signal cross coupled (short) between circuits. Common causes include Faulty Passenger Airbag, Passenger Airbag harness is open or shorted, Passenger Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0011 Ford indicates Passenger Frontal Stage 2 Deployment Control.
Common causes: Common causes include Faulty Passenger Airbag, Passenger Airbag harness is open or shorted, Passenger Airbag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,779

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0011 Ford Description

The Restraints Control Module (RCM) monitors all deployable device and sensor circuits for a signal cross coupled (short) between circuits. If the RCM detects a short between the circuits of one device and another device, it will store a DTC for each of the signal cross coupled faults in memory. The RCM sends a message to the Instrument Panel Cluster (IPC) to illuminate the air bag warning indicator. When a normal loop fault is present (one loop is either shorted to battery/ground, open circuit or low resistance), then signal cross coupled diagnostics will not be active. Once the normal loop fault is repaired, then the signal cross coupled diagnostics will resume.

OBDII Code B0011 Ford - Passenger Frontal Stage 2 Deployment Control - AutoCodes.com — B0011 Ford Code - Passenger Frontal Stage 2 Deployment Control

What does this mean?

What are the Possible Causes of the DTC B0011 Ford?

Faulty Passenger Airbag
Passenger Airbag harness is open or shorted
Passenger Airbag circuit poor electrical connection

How to Fix the DTC B0011 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0011 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0011 Ford code?

Need more information on how to fix the B0011 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0011 Ford code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0011 Ford Code

1. What are common symptoms of OBDII code B0011 in a Ford related to the Passenger Frontal Stage 2 Deployment Control?

The common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the passenger frontal airbag in the event of a collision.

2. What are the possible causes of OBDII code B0011 in a Ford related to the Passenger Frontal Stage 2 Deployment Control?

Possible causes include faulty wiring connections, damaged wiring harness, a malfunctioning passenger frontal airbag module, or issues with the airbag control module.

3. How can I diagnose OBDII code B0011 in a Ford related to the Passenger Frontal Stage 2 Deployment Control?

Diagnosis typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the wiring and connectors for damage, and testing the components involved in the passenger frontal airbag system.

4. Is it safe to drive with OBDII code B0011 related to the Passenger Frontal Stage 2 Deployment Control in a Ford?

It is not recommended to drive with this code present, as it indicates a potential issue with the passenger frontal airbag system, which could compromise safety in the event of a collision.

5. How can I repair OBDII code B0011 related to the Passenger Frontal Stage 2 Deployment Control in a Ford?

Repair options may include repairing or replacing damaged wiring, replacing faulty components such as the passenger frontal airbag module, or reprogramming the airbag control module, depending on the root cause of the issue.

6. Can I reset OBDII code B0011 related to the Passenger Frontal Stage 2 Deployment Control in a Ford with a simple reset tool?

While you can clear the fault code with a diagnostic scanner, it is important to diagnose and address the underlying issue causing the code to prevent it from reoccurring.

7. Are there any recalls or technical service bulletins related to OBDII code B0011 in a Ford Passenger Frontal Stage 2 Deployment Control?

It is recommended to check with Ford dealerships or online databases for any recalls or technical service bulletins related to this specific OBDII code to see if there are any known issues or fixes provided by the manufacturer.

8. How critical is it to address OBDII code B0011 related to the Passenger Frontal Stage 2 Deployment Control in a timely manner?

It is crucial to address this code promptly as it relates to the proper functioning of the passenger frontal airbag system, which is a key safety feature designed to protect occupants in the event of a collision.

9. Can a DIY enthusiast without extensive automotive experience repair OBDII code B0011 related to the Passenger Frontal Stage 2 Deployment Control in a Ford?

While some basic troubleshooting steps can be performed by DIY enthusiasts, it is recommended to consult a professional technician for a comprehensive diagnosis and repair of issues related to the airbag system.

10. How much can I expect to pay for repairing OBDII code B0011 related to the Passenger Frontal Stage 2 Deployment Control in a Ford at a dealership or repair shop?

Costs for repairing this code can vary depending on the root cause of the issue and the labor rates of the service provider. It is advisable to obtain multiple quotes from reputable repair shops or dealerships for an accurate estimate.