AutoCodes – Dodge – B0011 Dodge

B0011 Dodge Code - Passenger Frontal Squib 2 Control

Quick Answer

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Air Bag, Passenger Air Bag harness is open or shorted, Passenger Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0011 Dodge indicates Passenger Frontal Squib 2 Control.
Common causes: Common causes include Faulty Passenger Air Bag, Passenger Air Bag harness is open or shorted, Passenger Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 13,973

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 18, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0011 Dodge Description

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a floating configuration at the ORC (connected to neither power nor ground) as protection against inadvertent deployment. Use of the Supplemental Restraints System (SRS) load Tool in the tests below substitutes a suspect squib with a known good component. The use of the SRS Load Tool Adapter provides a test point as well as a method for opening the shorting bar connections within the ORC harness connector.

OBDII Code B0011 Dodge - Passenger Frontal Squib 2 Control - AutoCodes.com — B0011 Dodge Code - Passenger Frontal Squib 2 Control

What does this mean?

What are the Possible Causes of the DTC B0011 Dodge?

Faulty Passenger Air Bag
Passenger Air Bag harness is open or shorted
Passenger Air Bag circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B0011 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B0011:2B PASSENGER FRONTAL SQUIB 2 CONTROL WIRES SHORTED TOGETHER
B0011:11 PASSENGER FRONTAL SQUIB 2 CONTROL CIRCUIT SHORT TO GROUND
B0011:12 PASSENGER FRONTAL SQUIB 2 CONTROL CIRCUIT SHORT TO BATTERY
B0011:13 PASSENGER FRONTAL SQUIB 2 CONTROL CIRCUIT OPEN

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0011 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0011 Dodge code?

Need more information on how to fix the B0011 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0011 Dodge code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0011 Dodge Code

1. What are the common symptoms of OBDII code B0011 in a Dodge related to the Passenger Frontal Squib 2 Control?

The common symptoms include the airbag warning light illuminating on the dashboard and potential failure of the passenger side airbag system.

2. What are the possible causes of OBDII code B0011 in a Dodge?

The code B0011 typically indicates a fault with the Passenger Frontal Squib 2 Control circuit, which could be caused by a faulty airbag module, wiring issues, or a defective squib itself.

3. How can I diagnose the OBDII code B0011 in my Dodge?

Diagnosing OBDII code B0011 may require using a diagnostic scanner to read the fault codes, followed by a thorough inspection of the airbag system components, including wiring, connectors, and the squib itself.

4. Is it safe to drive my Dodge with OBDII code B0011 triggered?

It is generally not recommended to drive the vehicle with the airbag warning light on, as it indicates a potential issue with the passenger side airbag system, which may not deploy in case of an accident.

5. Can I reset the OBDII code B0011 in my Dodge without fixing the underlying issue?

While you can clear the fault codes temporarily, the airbag warning light is likely to reappear if the root cause of the problem is not addressed. It is crucial to diagnose and repair the issue to ensure the proper functioning of the airbag system.

6. How much does it typically cost to repair OBDII code B0011 in a Dodge?

The cost of repairing OBDII code B0011 can vary depending on the exact cause of the issue. It is recommended to consult a professional mechanic for a proper diagnosis and cost estimate.

7. Are there any DIY repair tips for fixing OBDII code B0011 in a Dodge?

DIY repair of OBDII code B0011 may not be recommended due to the complexity and safety implications of working on the airbag system. It is advisable to seek assistance from a qualified technician.

8. Can a faulty Passenger Frontal Squib 2 Control impact the overall safety of my Dodge?

Yes, a faulty Passenger Frontal Squib 2 Control can compromise the effectiveness of the passenger side airbag system, potentially putting occupants at risk in the event of a collision.

9. How long does it take to repair OBDII code B0011 in a Dodge?

The repair time for OBDII code B0011 can vary depending on the exact cause of the issue and the availability of replacement parts. It is advisable to consult a professional for a more accurate timeframe.

10. Is OBDII code B0011 a common issue in Dodge vehicles?

While the occurrence of OBDII code B0011 related to the Passenger Frontal Squib 2 Control may vary, it is a known issue in some Dodge models and should be addressed promptly to ensure the safety of the airbag system.