B0010 Chrysler Code - Passenger Frontal Squib 1 Control
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Passenger Air Bag, Passenger Air Bag harness is open or shorted, Passenger Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0010 Chrysler indicates Passenger Frontal Squib 1 Control.
- Common causes
- Common causes include Faulty Passenger Air Bag, Passenger Air Bag harness is open or shorted, Passenger Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0010 Chrysler Description
What are the Possible Causes of the DTC B0010 Chrysler?
- Faulty Passenger Air Bag
- Passenger Air Bag harness is open or shorted
- Passenger Air Bag circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B0010 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0010:11 PASSENGER FRONTAL SQUIB 1 CONTROL CIRCUIT SHORT TO GROUND
B0010:12 PASSENGER FRONTAL SQUIB 1 CONTROL CIRCUIT SHORT TO BATTERY
B0010:13 PASSENGER FRONTAL SQUIB 1 CONTROL CIRCUIT OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0010 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0010 Chrysler code?
Need more information on how to fix the B0010 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0010 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0010 Chrysler Code
1. What does OBDII code B0010 Chrysler indicate?
- This code, also known as Passenger Frontal Squib 1 Control, typically signifies an issue with the passenger side airbag system.
2. What are common symptoms of OBDII code B0010?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the passenger side airbag during a collision.
3. What are possible causes of OBDII code B0010 in a Chrysler vehicle?
- Causes may include a faulty passenger frontal squib 1 control module, wiring issues, loose connections, or a defective airbag inflator.
4. How can I diagnose the OBDII code B0010 in my Chrysler?
- Proper diagnosis involves using a diagnostic scanner to retrieve the specific fault code, inspecting the airbag system wiring and connections, and testing the passenger frontal squib 1 control module.
5. Is it safe to drive with OBDII code B0010 present?
- It is not recommended to drive with this code active, as it indicates a potential issue with the passenger side airbag system, which may compromise passenger safety in the event of a collision.
6. Can I reset OBDII code B0010 in my Chrysler without fixing the issue?
- While you can clear the code temporarily, it will likely reappear until the underlying problem with the passenger frontal squib 1 control is resolved.
7. How can I repair OBDII code B0010 in my Chrysler?
- Repair options may include replacing the passenger frontal squib 1 control module, repairing damaged wiring or connections, and ensuring proper functionality of the airbag system components.
8. Are there any safety precautions to consider when working on OBDII code B0010 in a Chrysler?
- It is crucial to disconnect the vehicle's battery, wait for the airbag system to fully discharge, and follow proper safety procedures to avoid accidental airbag deployment.
9. Can a DIY enthusiast fix OBDII code B0010 in a Chrysler?
- While some simple wiring checks and connections may be within reach of a DIY enthusiast, diagnosing and repairing the underlying cause of OBDII code B0010 may require professional expertise.
10. How much does it cost to repair OBDII code B0010 in a Chrysler?
- Repair costs can vary depending on the specific cause of the issue, but it is advisable to consult a qualified mechanic for an accurate diagnosis and cost estimate.
Discuss the causes and fixes for B0010 Chrysler OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
