B0002 Jeep Code - Driver Frontal Squib 2 Control
Quick Answer
When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. Common causes include Faulty Driver Air Bag, Driver Air Bag harness is open or shorted, Driver Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0002 Jeep indicates Driver Frontal Squib 2 Control.
- Common causes
- Common causes include Faulty Driver Air Bag, Driver Air Bag harness is open or shorted, Driver Air Bag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0002 Jeep Description
What are the Possible Causes of the DTC B0002 Jeep?
- Faulty Driver Air Bag
- Driver Air Bag harness is open or shorted
- Driver Air Bag circuit poor electrical connection
- Faulty Steering Wheel Clockspring
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B0002 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B0002:11 DRIVER FRONTAL SQUIB 2 CONTROL CIRCUIT SHORT TO GROUND
B0002:12 DRIVER FRONTAL SQUIB 2 CONTROL CIRCUIT SHORT TO BATTERY
B0002:13 DRIVER FRONTAL SQUIB 2 CONTROL CIRCUIT OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0002 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0002 Jeep code?
Need more information on how to fix the B0002 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0002 Jeep code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0002 Jeep Code
1. What are common symptoms of OBDII code B0002 in a Jeep related to the Driver Frontal Squib 2 Control?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the driver's side airbag during a collision.
2. What are possible causes of OBDII code B0002 in a Jeep?
- Possible causes include a faulty driver frontal squib 2 control module, damaged wiring or connectors in the airbag system, or a problem with the airbag control module.
3. How can I diagnose the issue causing OBDII code B0002 in my Jeep?
- Diagnosis typically involves using a scan tool to retrieve the specific fault codes, inspecting the wiring and connectors in the airbag system, and testing the driver frontal squib 2 control module for proper functionality.
4. Is it safe to drive my Jeep with OBDII code B0002 present?
- It is not recommended to drive the vehicle with this code present, as it indicates a potential issue with the driver's side airbag system, which may affect its deployment in the event of a collision.
5. Can I reset the OBDII code B0002 in my Jeep without addressing the underlying issue?
- While you can clear the code with a scan tool, it is important to address the underlying issue causing the fault code to prevent potential safety risks associated with the airbag system.
6. How much does it typically cost to repair OBDII code B0002 in a Jeep?
- The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing the driver frontal squib 2 control module, repairing damaged wiring, or addressing other components in the airbag system.
7. Are there any DIY repair tips for addressing OBDII code B0002 in a Jeep?
- DIY repair may not be recommended for this code, as it involves the airbag system, which is a critical safety component. It is best to have a qualified technician diagnose and repair the issue.
8. How long does it take to repair OBDII code B0002 in a Jeep?
- The repair time can vary depending on the extent of the issue and the availability of parts. It is best to consult with a professional technician for an accurate estimate of repair time.
9. Can OBDII code B0002 in a Jeep affect the vehicle's overall safety?
- Yes, this code relates to the driver's side airbag system, and if left unresolved, it can compromise the safety of the vehicle occupants by potentially preventing the deployment of the airbag in a collision.
10. Will addressing OBDII code B0002 in my Jeep require reprogramming or recalibration?
- Depending on the specific repair needed, it may require reprogramming or recalibration of the airbag control module or other components in the system to ensure proper functionality and safety.
Discuss the causes and fixes for B0002 Jeep OBDII Code
Code B0002 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
